← VBar Control Classic

Hobbywing current telemetry issue

VBar Control › VBar Control Classic · Started by B973645 on 30 May 2026 16:3030.05.2026 16:30
B973645 30 May 2026 16:3030.05.2026 16:30
Hi there

I have a Goosky RS4 Venom, with a Hobbywing v5 80A ESC, with a VBAR EVO and Control Touch.

I'm having an issue where the displayed battery % is incorrect, which I think is being caused by the current telemetry being under recorded. I'm using 6s, 2200mah batteries, and after a 7 minute flight, the telemetry shows 578mAh consumed and a max current of 13.2A.

Everything else is working great with this setup, but I'm new to the Mikado ecosystem and feeling a bit lost on this point!

Thanks very much for your help.
RV 30 May 2026 18:3330.05.2026 18:33
Hello,

the data source is the ESC itself. We just display and use what the ESC transmits to us through our telemetry.

So - at the end - please ask Hobbywing here. It has been a while but there was a thing with this small ESC's and their measuring precision ;-(

But - one question ... having a look at the ui log here - do the timestamps etc. match with your flight? Could you please attach the 2 logs or give me the regarding serial numbers (if VBar Control touch/EVO) of VBar Control an VBar so i can have a look at the cloud?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
B973645 30 May 2026 19:2730.05.2026 19:27
Thanks very much for your help!

The timestamps do match up with the flight time.

The serial numbers are:

11007173 VBar Control touch / EVO
27010247 VBar EVO (VLink)
RV 30 May 2026 22:5630.05.2026 22:56
Thanks.

I had a look and there is no interruption etc. which may also probably cause a new mAh count (but not the wrong current values).

So - i must admit this is displayed here as Hobbywing transmits it to us.

Before claiming at Hobbywing i would check if there is any newer ESC firmware available who can be loaded.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
B973645 31 May 2026 00:4331.05.2026 00:43
Thanks for your time looking into this, will do
VStabi VStabi Pioneer of Flybarless