← VBar Control Classic

Vbar Control + Mini Vbar + 7ch Receiver

VBar Control › VBar Control Classic · Started by rubig15@hotmail.co on 23 January 2026 16:4723.01.2026 16:47
rubig15@hotmail.co 23 January 2026 16:4723.01.2026 16:47
Hello! I recently purchased a Vbar Control Classic to get started in the world of Vbar, and I wanted to ask a question I have. I have several Mini Vbars that I used to use with Futaba SBUS. If I buy the Mikado 7-channel receivers, will I be able to connect them to the Mini Vbar and program the entire Vbar on the transmitter? Just like with the Satellite that was sold before.

Do I have to connect the receiver to the SBUS port as I did with Futaba?
Thank you!
rubig15@hotmail.co 23 January 2026 19:5823.01.2026 19:58
Hello, no info??
RV 23 January 2026 21:2823.01.2026 21:28
Hello,

please be a bit patient. We are answering as soon as we can usually. So this may thake a day or so as we are not watching the forum 24/7 (but sometimes very often ...)

For your topic:

Please use a VBar EVO with internal VLink.

- The Vlink for old Vbars is no more in production.

- The old Vbars are out of service.

- External receivers (independend which) have always downsides with the data transmission, the cable in between (point for hits etc.), the seperate voltage regulators - so not recommended here.

- The RX only above is for planes, could work with some self-research and programming by macrocells - but the heli itself must be set up with a PC and V5. It still flies with old V5 control loop and old VBar hardware - both over a decade old and way behind a VBar EVO. Makes just no sense and gives you zero benefit but some work to get it running.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 1 time(s). Last edit at 01/23/2026 09:29PM by RV.
VStabi VStabi Pioneer of Flybarless