← VBar Control Classic

VStabi EVO 7.1 PC Software

VBar Control › VBar Control Classic · Started by Mark Norris on 4 November 2025 05:1304.11.2025 05:13
Mark Norris 4 November 2025 05:1304.11.2025 05:13
Hello,
Is it OK to use the VStabi EVO 7.1 PC Software to setup the EVO. I think OK but wanted to make sure since I believe the style is now missing from the transmitter menus but its still in the PC software.

Also, when in setup adjusting the cyclic to 8 degrees I have had 2 times when the EVO rebooted and went into bootloader mode since the USB was plugged in. I have a Mikado capacitor backup and I have to unplug that from the EVO to turn the system off. Very strange that it rebooted since I have the 05584 VBar Control Power system.

Mark

Eddi E. aus G. 4 November 2025 09:2004.11.2025 09:20
Hi Mark,

in general, the V7 PC software is made to set up V7 VBar EVO.
It's intention is to service customers who don't have a VBar Control, but use other radio systems.

I did just connect a VBar EVO V7 Express to my VBar Control, and it shows Style.
Maybe you're mixing it up with V8 which has a different control loop, and there the parameter Control Response?

The reboot, no idea (yet), but maybe the event log can tell you more?

In any case, I'd leave the computer be and use my transmitter :-) but everybody tortures himself as best as he can :-)

–Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless