← VBar Control Classic

HobbyWing 180 V5 No Telemetry

VBar Control › VBar Control Classic · Started by Mark Norris on 22 October 2025 02:1222.10.2025 02:12
Mark Norris 22 October 2025 02:1222.10.2025 02:12
Hello,
I just purchased a Vbar Control EVO+, Vbar EVO Vlink and a HobbyWing 180Amp V5 ESC.
I cannot seem to get the HobbyWing icon to show up on the transmitter.

Things I've tried so far-
I purchased the HobbyWing programmer and updated to the latest firmware, PL-04.1.01 (I see no vbar version like in so many vids I've watched).

I went into telemetry on the TX and toggled temp sensor on and off.

I've made sure I'm up to date on Mikado firmware.

Double checked all wiring (see attached images incase I messed up).

Please help.

Thank You.

Mark Norris

Mark Norris 22 October 2025 02:5022.10.2025 02:50
Dang I'm dumb - I kept looking for an app to install on the TX itself but then realized I needed to use the control manager and applications / telemetry to install the HW and mikado backup.

Sorry about that.
Mark Norris
RV 22 October 2025 06:5222.10.2025 06:52
Usually all apps can be installed with the app store in VBCt/E over WiFi.

Was the app store there and did it have WiFi connection?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 22 October 2025 09:0722.10.2025 09:07
Hi Mark,

pls also check that Auto Install Notification is installed.
This will give you a heads up whenever you connect something which has no App installed for it yet, and it will allow you to install it directly.

We always assume that when you're at home, you're on a WiFi, so it's as comfortable as it gets, also with pushing data out to the cloud, or with the home zone App.

I know that some people disable WiFi (or recommend it), to save battery power, or to avoid interference, but to be honest, over a full discharge cycle, this will only cost you a couple of percent, it's really nothing, and WiFi does not interfere with the radio link while flying.
I always leave WiFi and Online Service and Cloud Service enabled.

And at the field, all you need is enable your personal hot spot when required, and you can also do everything you want, e.g. load corresponding Apps if you bind to a buddy's model who has a different ESC on it, or other items you don't use normally.

Best,

Eddi

Born to fly ...
forced to work.
Mark Norris 22 October 2025 15:5422.10.2025 15:54
Hello Eddie,
I was on wifi and i did look on the store and did not see the HobbyWing app. Maybe I just missed it.

Thanks for the thourough response.

Mark
Mark Norris 22 October 2025 16:1522.10.2025 16:15
Update - I'm on wifi with the radio and in the "Shop". I don't even see the 2 apps that I installed using the pc manager software. Am I looking in the wrong location. I do have a Application button on the transmitter (both Vcontrol Touch & Vcontrol EVO+) but it doesnt do anything when I click it.

How can i see the apps pictured in the image on the transmitter.

Mark

RV 22 October 2025 20:1522.10.2025 20:15
Hello Mark,

i have checked the necessary App (there is a hidden Shop App) which is installed on your device.

Is the "shop" section there? - If you click on it - does it open the shop categories? - and then, in telemetry - is there a HW app?

Regards (EN) / Greetings (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Please use a PC and a proper keyboard for posts and replies, and answer all questions completely. Take your time and answer follow-up questions thoroughly and completely.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For individual communication, please use email exclusively ! - Private messages, messenger, chat, etc. will not be processed.
For single user communication please send an email only ! PM, Messenger, Chat etc. won't be read.


machine-translated from German · Show original
Eddi E. aus G. 23 October 2025 09:0723.10.2025 09:07
Hi,

in any case, loaded Apps show (only) on screen if a corresponding device is detected, by the VBar flybarless.
If they don't, something's wrong (wiring, settings (e.g. temperature on TELE1), or Spektrum as an input, or an ESC with a firmware which does not support VBar telemetry).

Normally, when the transmitter is on a WiFi, and when you click Apps at the web site, they will install or uninstall automatically.
Else, you might want to run Transmitter Settings/App Updater.

The Shop App (basically the same selection as on the web site but the Pro/Value Pack-Apps,, see Rainer's post.

What can help if something has been corrupted is, change the Language, wait for it, change back.
This deletes all system files and Apps of one language and loads the other.

Best,

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless