rubig15@hotmail.co
27 May 2025 10:3827.05.2025 10:38
Hi guys! I have a Goosky S2 with a Vbar Control V1, I have programmed the heli with the Macrocell but I see that the timer is not activated, does anyone know how to solve the problem?
I follow this video for setup
https://www.youtube.com/watch?v=L-0imGg5reM&t=81s
RV
27 May 2025 11:2727.05.2025 11:27
Did you use my programming for VBC t/EVO with its wizard?
If not - grab a buddy with VBC t/E and do so...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Did you use my programming for VBC t/EVO with its wizard?
If not - grab a buddy with VBC t/E and do so ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rubig15@hotmail.co
27 May 2025 11:3127.05.2025 11:31
I don't have a Vbar control Touch or EVO, I am using the Vbar Vontrol 1 Generation, I bought it a few weeks ago to test the Mikado transmitters.
Eddi E. aus G.
27 May 2025 11:4627.05.2025 11:46
Hi,
the timer is linked to the motor switch/motor logic, and to the throttle stick position (with non-heli firmwares, and RX Only is a simple receiver).
Without having watched the video, I'd suspect other switches are used, and/or the throttle output signal is below par for the timer to be triggered.
Kind regards
Eddi
Born to fly ...
forced to work.
rubig15@hotmail.co
27 May 2025 11:5527.05.2025 11:55
The problem is that I am completely new to the Vbar system radio... I have configured the transmitter according to the information I have seen on the internet, what I don't understand is why the Touch in the video has the timer working and mine doesn't work when I have configured everything...
Is it possible to create a macrocell in some way so that the timer recovers the throttle?
Eddi E. aus G.
27 May 2025 12:1227.05.2025 12:12
Hi,
if I recall correctly, for Touch and later, there are presets, for use of RX-Only with OMP or Goosky models, provided by us.
No idea if they have timers, though.
And I'm not sure if they are available for VBar Control Classic.
Maybe someone with a working setup can save them (setup file and macrocell file), send them to you, and you can copy them onto your transmitter, to finally load them onto your RX Only unit.
For VBar Control Touch and later, there's also the Pro/Value Pack, with Pro Timers, where you can set up your own—maybe the guy in the video has it.
I'm sorry I don't have no such model, so I can't do any testing :-/
Support for other flight controls behind RX-Only can only be limited :-/
Kind regards
Eddi
Born to fly ...
forced to work.
rubig15@hotmail.co
27 May 2025 16:1127.05.2025 16:11
Hi, thanks for the help...I will try to contact someone who has an older Vcontrol to see if they can help me....