Am on Jan's reservation list for the TDR II and TDS helis(1 each).
#190 and #147 respectively....perhaps in early 2015.... :-) .
Having only ever setup a 2-blade systems, I was wondering what
the setup procedure is for a 3-blade systen.
I have some ideas...such as designating one particular main blade
as the "master"...and using the "blade foldback" method....ensure
that the 2 other blade tips are parallel at 0 deg. collective....as well
as having equal pitch deflection at full pos/neg collective....all the
way "around the clock".....done 1 blade at a time.....assuming the swash
has been adjusted before doing the mains.
But ya'll are the experts....so I'll defer to your expertise. :-)
Thanks for any advice....
1 mal bearbeitet. Zuletzt am 08.05.2014 06:00 von GeneG.
#190 and #147 respectively....perhaps in early 2015.... :-) .
Having only ever setup a 2-blade systems, I was wondering what
the setup procedure is for a 3-blade systen.
I have some ideas...such as designating one particular main blade
as the "master"...and using the "blade foldback" method....ensure
that the 2 other blade tips are parallel at 0 deg. collective....as well
as having equal pitch deflection at full pos/neg collective....all the
way "around the clock".....done 1 blade at a time.....assuming the swash
has been adjusted before doing the mains.
But ya'll are the experts....so I'll defer to your expertise. :-)
Thanks for any advice....
1 mal bearbeitet. Zuletzt am 08.05.2014 06:00 von GeneG.