← Henseleit

RC input of channel 2 out of range. translated

OEM models › Henseleit · Started by duc996bp on 19 February 2016 12:3219.02.2016 12:32
duc996bp 19 February 2016 12:3219.02.2016 12:32
Hello

Looking at the logs of my Mini VBAR I have noticed 2 entries with the line "RC input of channel 2 out of range", they both occur at the beginning of powering on. See log file attached

The VBAR is on my TDR which is using Futaba 451 servos and a R6008 Rx. I have not noticed any problems in flight. I have checked all connection and everything is plugged in ok.

Any thoughts on this? Is it something I should be concerned about?

Thanks

John Dateianhänge:
öffnen | Download - log.pdf (248.8 KB)
ulrich 19 February 2016 12:4719.02.2016 12:47
I Think the pluuging in of the battery produces a quite strong EMV spike, which couples into the wire from the receiver to the VBar. So it damages one packet.

Since it is so seldom, and correlated with the plug in of the battery, it does not concern me. Only thing you can do is getting as much space as possible between power wires and the data and servo wires.

so long ... Uli
http://www.vstabi.de
duc996bp 19 February 2016 13:1319.02.2016 13:13
Thank you Uli
VStabi VStabi Pioneer of Flybarless