← Henseleit

VBC Retracts locking switch translated

OEM models › Henseleit · Started by Fasster on 21 April 2016 22:2221.04.2016 22:22
Fasster 21 April 2016 22:2221.04.2016 22:22
Hi Guys

I would like to have an independently allocated locking switch on my VBC for the retracts on the TDR2 ,

is it possible to have a 2nd locking switch similar to the motor ?

Thank you
Andrew
RV 22 April 2016 06:1622.04.2016 06:16
You can chain all Makrocells ... threelevel preferred as input cells and channel as output cell ...

http://vstabi.info/en/node/1914

Having multiple input cells - you may use a MUX in between.

Just connect a servo on the bench and try.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Fingolf 22 April 2016 07:5722.04.2016 07:57
Hi Andrew,

note that the TDR2 retracts have a security function included, so you have to switch the retracts 2 times
before they will work (only first time after power on)

I've created a macro cell for the retracts, the function is only active, if the motor switch is on:

retracs

If you are adding a second switch, you have to use the switches 3 times before they will work.

I think this not practicable, but it's your choice.

Stephan
Fasster 22 April 2016 08:4722.04.2016 08:47
Thank you Rainer .

Thank you Stephen

I will wait until i install it and use it , then decide if it is necessary .


Andrew
Vinger 7 August 2016 17:5107.08.2016 17:51
Fingolf Wrote:
-------------------------------------------------------
> Hi Andrew,
>
> note that the TDR2 retracts have a security
> function included, so you have to switch the
> retracts 2 times
> before they will work (only first time after power
> on)
>
> I've created a macro cell for the retracts, the
> function is only active, if the motor switch is
> on:
>
> retracs
>
> If you are adding a second switch, you have to use
> the switches 3 times before they will work.
>
> I think this not practicable, but it's your
> choice.
>
> Stephan


Any chance on getting your guide in English?

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
VStabi VStabi Pioneer of Flybarless