swalko
12 July 2015 22:3812.07.2015 22:38
Will it be possible sometime (after update) disable geometry correction on NEO?
1 mal bearbeitet. Zuletzt am 12.07.2015 22:39 von swalko.
RV
12 July 2015 22:4212.07.2015 22:42
What might be your intention and purpose to use?
Maybe we have a better solution ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
swalko
13 July 2015 06:4913.07.2015 06:49
Hi Rainer
Question is directly related with this theme
http://www.vstabi.info/forum/read.php?26,133302 . Soon i will get TDR2. Because of small space for electronics and on your recommendation (NEO has a bit more throw for servo travels) , i got NEO and after that i found that it is not possible to disable geometry correction :-( . Geometry correction is undesired with Linear Servo Drive (LSD 8-) ) .
2 mal bearbeitet. Zuletzt am 13.07.2015 06:53 von swalko.
RV
13 July 2015 08:5013.07.2015 08:50
I'll have a look - maybe it will be possible together with a VBar Control.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
swalko
14 July 2015 11:2114.07.2015 11:21
RV
14 July 2015 11:3614.07.2015 11:36
Did i post a timeline when i'll have a look?
Please be a bit patient - i'll post as soon as possible.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 14.07.2015 11:37 von RV.
MarkusD
14 July 2015 17:4214.07.2015 17:42
Dear Rainer,
I belive that this intersting to a couple of people...as a lot are awaiting the new TDR 2
Robert Sixt is using a MiniVBar in his TDR2 - does that mean that we can expect an update or so to disable geometry correction in old VBars ?
As swalko asked, will it then also be possible to tweak the new Neo without VBC ?
i actually thought that Henseleit pilots or Jan would be in contact with hardware producers to ensure that proper hardware is available upon release....
MarkusD
swalko
14 July 2015 20:0214.07.2015 20:02
Hi Markus
On VStabi with 5.3 Pro firmware is possible to disable geometry correction, so old units are good from this point of view. I got NEO, because i dont expected that this settings will be removed. I do not own VControl, so i cannot be 100% sure, but from NEO manual it seems that it is not possible currently to disable geometry correction on any NEO unit (VLink and NonVLink) .
1 mal bearbeitet. Zuletzt am 14.07.2015 20:04 von swalko.
RV
14 July 2015 21:3714.07.2015 21:37
Robert uses V5 and no VBC ...
We will have a look what we can do on a NEO - Uli is already in communication with Jan - so we will see ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
swalko
15 July 2015 06:2215.07.2015 06:22
Thank you Rainer for answer. I hope that everything will be solved (travels and geometry correction) so we dont need to use other fbl units on TDR2's.