← VBar NEO for external transmitters

Vstabi NEO PC software translated

VBar › VBar NEO for external transmitters · Started by benben on 9 July 2015 04:3609.07.2015 04:36
benben 9 July 2015 04:3609.07.2015 04:36
I downloaded the Neo pc software, but it says corrupt file when I tried to open it.
RV 9 July 2015 06:3309.07.2015 06:33
Please delete the download and retry.

If the message still persists - add a screenshot.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
benben 9 July 2015 06:4209.07.2015 06:42
In the English page of the download the version is 1.2 and in the German page it's 1.3.
Fingolf 9 July 2015 06:5709.07.2015 06:57
Now it is 1.3 in the english section.
benben 9 July 2015 07:0409.07.2015 07:04
I cannot add screenshot here.
benben 9 July 2015 07:1309.07.2015 07:13
It is still 1.2 in the English section
Fingolf 9 July 2015 07:2509.07.2015 07:25
ahhh yes you are right, only the text is 1.3

I think Rainer will fix this soon.
benben 9 July 2015 07:3209.07.2015 07:32
RV schrieb:
-------------------------------------------------------
> Please delete the download and retry.
>
> If the message still persists - add a screenshot.


It still says corrupt file.
Eddi E. aus G. 9 July 2015 08:3909.07.2015 08:39
Hi,

Mac or PC? If Mac, did you read and follow the read me file?

Kind regards

Eddi

Born to fly ...
forced to work.
benben 9 July 2015 09:1909.07.2015 09:19
Eddi E. aus G. schrieb:
-------------------------------------------------------
> Hi,
>
> Mac or PC? If Mac, did you read and follow the
> read me file?
>
> Kind regards
>
> Eddi


PC
RV 9 July 2015 09:3909.07.2015 09:39
Fixed.

until the cache will be refreshed - use german download.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
benben 9 July 2015 10:1809.07.2015 10:18
I had to add "-l en" in property
Alex1971 21 July 2015 19:5521.07.2015 19:55
Hi
Neo software does not work on the Mac. What is the problem?

RV 21 July 2015 21:4621.07.2015 21:46
Quote:did you notice the read me file in the download?

Please follow the instructions there

- Zitierten Text ausblenden -
> In case your Mac prompts
> 'VBar Control Manager can't be opened because it is from an unidentified developer'
> or
> 'VBar Control Manager is damaged and can't be opened. You should move it to the trash',
> please follow this little guide:
> . Copy VBar Control Manager to your /Applications directory
> . Open System Preferences
> . Select Security
> . Click the lock to make changes, enter your admin password
> . Temporarily select 'Allows apps downloaded from:' and 'Anywhere'
> . Open VBar Control Manager
> . Set your Security settings back to e.g. 'Mac App Store and identified developers'
> . Now the VBar Control Manager will always start without this workaround

This should also work for the ‚corrupt‘ message which older MacOS issue.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Alex1971 21 July 2015 22:0521.07.2015 22:05
It did not help
Still not working
RV 21 July 2015 22:0821.07.2015 22:08
In this case - wait for Eddi (Mac Man) taking over here.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Alex1971 21 July 2015 22:2121.07.2015 22:21
Ok. I will wait
above 21 July 2015 22:5321.07.2015 22:53
I have the same problem and I hit the keys.sto file on the site indicated.
in my case is a windows.
what is the solution?
RV 21 July 2015 22:5721.07.2015 22:57
Please - keep the board clean. One Pilot - one issue - one thread. No threadnapping here!

@ above: open a new thread please - and escribe exactly what you did, possibly add some screenshots.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 21.07.2015 22:58 von RV.
Eddi E. aus G. 22 July 2015 16:1022.07.2015 16:10
Hi,

it seems we have an issue when an operating system other than German or English is used, no matter if Windows or Mac.

We are working on it.

You can either add the parameter -l en to the program call: right click the shortcut on Windows, click Properties, edit like this

Quote: "C:\Program Files (x86)\VBarControl\jre\bin\javaw.exe" -Xmx200M -jar "C:\Program Files (x86)\VBarControl\VStabiShell61o.jar" -c config_61 -n -l en



On a Mac, you can temporarily set the primary language of the computer to English in System Preferences, then start the software.
After starting the VBar Software, you can switch back to your original language.
You can do that without a restart or anything.

Only Applications which are startet after changing the language will be affected, so all your other open Applications will stay in your actual localization.

Or you can edit the info.plist file of the App (right click the App, click 'Show Package Contents', locate the info.plist file, open it in an editor, locate the line you see above and edit accordingly).

Kind regards

Eddi

Born to fly ...
forced to work.



4 mal bearbeitet. Zuletzt am 22.07.2015 16:12 von Eddi E. aus G..
Alex1971 23 July 2015 08:2523.07.2015 08:25
Thank you, it works. Editing info.plist the best solution
VStabi VStabi Pioneer of Flybarless