← VBar NEO for external transmitters

Problem to setup neo, need a "key"

VBar › VBar NEO for external transmitters · Started by Björn on 2 August 2015 12:5602.08.2015 12:56
Björn 2 August 2015 12:5602.08.2015 12:56
Hello!

I have registered and updated neo to pro, downloaded vbar Controlmanager, but when I try to setup Neo, I cant start the Neo pc software 6.1.0. Its says "corrupt file" and I need a "key".. Im going to my Devices and I download a keyfile but cant get the Neo to connect to pc software 6.1.0. I cant figure this out and now i`m wondering what to do?
Can you help me with this?
Best regards: Björn
Björn 2 August 2015 13:5902.08.2015 13:59
Its says...

Vbar NEO setup software... "The connected Unit is not found in your List of Units. Please go to vstabi.info and request a new key file to enable access to this device.
RV 2 August 2015 16:1702.08.2015 16:17
Is the keyfile in the right folder?

Please click on the Keyfile button at the PC Soft (right side) for our FAQ with installation instructions.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 02.08.2015 16:17 von RV.
Björn 2 August 2015 20:5802.08.2015 20:58
Hello!

Thanks for your quick answer. I have fixed it now and everything working great! Like your stuff... :-) Best regards Björn
VStabi VStabi Pioneer of Flybarless