← VBar NEO for external transmitters

Neo translated

VBar › VBar NEO for external transmitters · Started by rwilabee on 6 August 2015 05:0006.08.2015 05:00
rwilabee 6 August 2015 05:0006.08.2015 05:00
I'm assuming the Neo with V link receiver is not compatible with the Futaba Radio.

Rich



2 mal bearbeitet. Zuletzt am 08.08.2015 17:07 von rwilabee.
RV 6 August 2015 08:4506.08.2015 08:45
Quote:I'm assuming the Neo with V link receiver is not compatible with the Futaba Radio

Wrong information ;-)

All Neos can do all protocols and also be set up with the PC. Although VBar Control usage and Set Up is the best way.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 6 August 2015 14:5706.08.2015 14:57
So I see this info regarding the software for the V link receiver. Is the software available yet for non Vbar Radios.

Can be used with non VBar control radios only when the new PC software is available.

Thanks

Rich
RV 6 August 2015 15:0706.08.2015 15:07
Check out the download section ...

It works with both - but latest firmware update required ;-)

http://www.vstabi.info/en/node/1855

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless