ragge1
14 August 2015 07:3714.08.2015 07:37
have tried the rescue couple of time and working very nice but yesterday all off a sudden if started moving very slow , I've not done any changes , this is on my 6HV , a video when it work ok , but now it like halv that speed ,
https://www.youtube.com/watch?v=fzqXR7ZWMv8
any advice thanks
RV
14 August 2015 09:1614.08.2015 09:16
As our Rescue gives "half throw" always - there could be a mechanical issue. Please check main rotor thrust bearings, swash etc. for smooth running. Also add the setup file and event log here.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ragge1
15 August 2015 10:5115.08.2015 10:51
let me try this again , see if the files comes like zip file succesfully ;-)
Dateianhänge:
öffnen |
Download -
6HV Neo setup.zip
(506 bytes)
öffnen |
Download -
vbar Neo.zip
(1.4 KB)
RV
15 August 2015 12:4315.08.2015 12:43
OK - thanks.
Looking on the Files - i have 2 possible hints.
In Bank 3 we have a low Optimizer (42) as in the others (48).
Some rescues have been done in a fast row.
Now - if the regarding rescues have been in Bank3 - it may be this opti value. Just dial to 48 and turn it off then.
If a couple of rescues was done w/o some kind of reasonable flight in between - the pitch will be a bit shifted (it neutralizes during stick moves slowly) - and so maybe the rest throw won't have been enough.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ragge1
15 August 2015 16:5215.08.2015 16:52
thanks will do that and test next time the weather is good ;-)
but is it possible to make that the evenlog is saved as a pdf file like its on the 5,3 version
RV
15 August 2015 20:0615.08.2015 20:06
Unfortunately not. It is a text file according to the Vbar Control and all V6 versions.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 15.08.2015 20:06 von RV.