Hello Mikado Team!
Heli - Trex 600 Nitro. Engine - O.S. 55HZ.
I use VBar nitro governor mode with 1600 rpm headspeed.
RPM sensor mounted on engine fan.
After switching channel "Motor" from "Idle" to "Run" engine very fast gaining rpm. Because of this, when during clutch engagement main rotor blade fold in the holder. You can see on the video (time 0:07) https://youtu.be/1PbEFtCS7Ks
or image
My governor setting
My expert governor settings
As a result of my attempt to more tighten blade in the holder - "Extreme vibration level" in the log.
How can I make a more smooth start? Otherwise, I can break blades or clutch.
Sorry for my English.
Best regards, Alexey
PS. Necessary adjustment of the curve "time - percentage of throttle" by user.
I think this only way to make a smooth start-up for a particular engine and clutch.
3 mal bearbeitet. Zuletzt am 24.08.2015 15:39 von alexn.
Heli - Trex 600 Nitro. Engine - O.S. 55HZ.
I use VBar nitro governor mode with 1600 rpm headspeed.
RPM sensor mounted on engine fan.
After switching channel "Motor" from "Idle" to "Run" engine very fast gaining rpm. Because of this, when during clutch engagement main rotor blade fold in the holder. You can see on the video (time 0:07) https://youtu.be/1PbEFtCS7Ks
or image
My governor setting
My expert governor settings
As a result of my attempt to more tighten blade in the holder - "Extreme vibration level" in the log.
How can I make a more smooth start? Otherwise, I can break blades or clutch.
Sorry for my English.
Best regards, Alexey
PS. Necessary adjustment of the curve "time - percentage of throttle" by user.
I think this only way to make a smooth start-up for a particular engine and clutch.
3 mal bearbeitet. Zuletzt am 24.08.2015 15:39 von alexn.