← VBar NEO for external transmitters

Neo nitro gov question translated

VBar › VBar NEO for external transmitters · Started by Chitty024 on 1 September 2015 02:0301.09.2015 02:03
Chitty024 1 September 2015 02:0301.09.2015 02:03
I finally got everything prgrammed to my t10j after a long night of headache. Everything operates as id like exceot the gov. I am using the spartan gov sensor which is good for rc voltage. The problem I am having is the light next to "magnet" is always lit and does not change whether the magnet is under the sensor or not. The sensor is brand new so I know it is good, I also tried another sensor and got the same issue. Im guessing i just need to change something simple but i dont know what it is. Can anyone help me? What should the lite be doing?
RV 1 September 2015 06:4501.09.2015 06:45
Some sensors need more signals to read correctly. So i would simple run the heli in "throttlecurve mode" on one bank w/o blades - but USB connected - and have a look ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless