← VBar NEO for external transmitters

Vbar Neo translated

VBar › VBar NEO for external transmitters · Started by rwilabee on 7 August 2015 07:1107.08.2015 07:11
rwilabee 7 August 2015 07:1107.08.2015 07:11
Is there some place that shows the differences between the Silverline and the Neo.

Thanks

Rich



1 mal bearbeitet. Zuletzt am 08.08.2015 17:09 von rwilabee.
RV 7 August 2015 07:1807.08.2015 07:18
Hello Rich,

in general the Nitro governor is much better implemented on the NEO. So please set up from scratch as the Gov values won't be the same.

I think you know my Vario gasser here:

http://vstabi.info/en/node/1776

There are also setup tips -and my NEO values. For fast setup in fliight - it may be best to use a VBar Control.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 7 August 2015 15:2007.08.2015 15:20
Your right I do recognize your Acrobatic. I do have my electronics laid out a little different. Nice choice of heli's. :-)

Thanks

Rich



1 mal bearbeitet. Zuletzt am 08.08.2015 17:10 von rwilabee.
RV 7 August 2015 15:2407.08.2015 15:24
Please read until the end. Everything. The setup was done w/o rpm sensor - as it is required on every nitro/gasser - and after this i have added the Govenor ...

But you nee pro for it - just purchase through the app store. See als my videos for this:

http://vstabi.info/en/node/1856

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 7 August 2015 16:0907.08.2015 16:09
Rainer you are correct I didn't read to the end. Great article and loads of info. I have an extra Castle 10 amp regulator so I guess I could use it or make a regulator like you did. I can program the Castle for 6 volts but it probably won't make any difference going with 6 volts instead of your 5 volts so I might just try to make one for the fun of it. Nice flying. Looked like an auto at the end?

Rich



2 mal bearbeitet. Zuletzt am 08.08.2015 17:11 von rwilabee.
RV 7 August 2015 16:2007.08.2015 16:20
Quote:it probably won't make any difference going with 6 volts instead of your 5 volts

You're wrong with 6V at the SG - they told me it may be best running it at 5V. Just do it - on SL and on NEO. The 7805 may cost a few cent only ...

I had the SG running well on both - at 5V.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 7 August 2015 17:1307.08.2015 17:13
Yep your right 5 volts best. I just order the regulator only 60 cents here in the US.

Thanks

Rich



1 mal bearbeitet. Zuletzt am 08.08.2015 17:11 von rwilabee.
rwilabee 7 August 2015 19:0207.08.2015 19:02
Rainer here is the way my electronics are set up with the Silverline.


Rich



1 mal bearbeitet. Zuletzt am 08.08.2015 17:12 von rwilabee.

rwilabee 7 August 2015 20:3107.08.2015 20:31
Rainer....

Just curious since your Acrobatic flies so well. Are you using center stick for Hover?

Thanks

Rich
RV 7 August 2015 20:5107.08.2015 20:51
Nope ...

I have +-12 deg approx. in all my helis - also the Scale and Acrobatic. And my setups (agilities) are always the same - so every heli has approx. the same response on the sticks (cyclic, tail) too.

I have seen your using the Deans plugs - we have tested them and they can sparkle easily when plugging in - this means - in some rare cases the sensors won't start correctly ;-( - this is one of the reasons for me using EC3. Of course - a pre flight check will give you a hint ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 7 August 2015 21:0107.08.2015 21:01
Good to know on the Deans. I find them easier to plug and unplug than the EC3. So are you setting up your Acrobatic like you would a standard heli with hover at 3/4 throttle. Are you running flight modes with a V curve on the Throttle so you can do Acrobatics with the Vario.
RV 7 August 2015 21:2107.08.2015 21:21
I am running the VBar Gov. "Behind" the gov we have a V-curve. This is determined as Point 1 and 3 (sum of Basic Throttle and collective add) and Point 2 (basic throttle). This values are important (ans Gov min too) to be set up on a gasser w/o gov first - they are much more different than the nitro preset.

I just spool it up like a electric - just flip the switch ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 07.08.2015 21:23 von RV.
rwilabee 7 August 2015 21:5407.08.2015 21:54
So with that set up where is the stick when you lift off.

Thanks

Rich
RV 7 August 2015 22:0407.08.2015 22:04
As on a 3d heli ...

I spool it up by the VBar Gov at zero collective (center) - just flip the motor switch and wait until the headspeed is stable.

Then i add some collective - approx. a bit less than half throw from zero to full to lift off and get it in a hover.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 8 August 2015 00:2408.08.2015 00:24
The Vario Rep has been having us set the Vario Trainer where you have 6 degrees at center stick and hover at center stick. On my 3D helis I always had 0 degrees at center stick with hover somewhere close to 3/4 stick. So I had set up my Acrobatic to 6 degrees at center stick and it just doesn't feel natural. When I get the Neo I'm going to set the Acrobatic up like I do my smaller 3D helis and see how it does.
RV 8 August 2015 07:3408.08.2015 07:34
Yep - this is my experience too. I like to have the same stick feeling and positions on every heli - it makes flying more easy, especially in stunt, critical situations or even Autos.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 9 August 2015 01:4809.08.2015 01:48
Does the Neo need to be mounted Horizontal because of the built in sensor. I haven't looked at the software yet, it will probably tell me how it has to be mounted. When using an external sensor along with the Neo does it use both Sensors?

Thanks

Rich



5 mal bearbeitet. Zuletzt am 09.08.2015 15:47 von rwilabee.
RV 10 August 2015 10:0410.08.2015 10:04
Added this to the FAQ right now:

http://www.vstabi.info/en/node/1961

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 10 August 2015 14:5210.08.2015 14:52
I see it says we have to align and set up both. Does that just mean that it needs to be in the same direction as the Neo or is there some set individually for each one.

Like we talked about earlier I am going to set my Acrobatic up the same as I would one of my 3D helis. I've never used banks but is that where they are used. A bank for say 3 different flight modes. I haven't reached it yet but I'm assuming if that is the case I will assign each bank to one of my flight mode switch positions. If this is the proper way to do it then do I set up my Pitch Curves in the radio for all 3 banks.

Thanks for all your help.

Rich



1 mal bearbeitet. Zuletzt am 10.08.2015 16:59 von rwilabee.
RV 10 August 2015 23:2110.08.2015 23:21
Quote:or is there some set individually for each one.

PC software, Sensor tab for NEO (see what is in the description and drawing there!) - and then click doctors hat at the right top corner ...


Quote:I will assign each bank to one of my flight mode switch positions

Yep - we say Bank - other say Flight condition ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 28 August 2015 06:0528.08.2015 06:05
I was following your thread about the new head you had made for your Acrobatic. I would sure like one for my Acrobatic. Would I need to find a machine shop because I have the 12mm shaft like your Acrobatic or do you know a site that sells them or can make them.

Thanks
RV 28 August 2015 12:5328.08.2015 12:53
This one was made by a clubmate - and so it is unique ;-(

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 24 September 2015 20:2324.09.2015 20:23
Just wanted to update you on my Acrobatic Head. Per Vario's suggestion I changed the softer O'rings with their Hard O'rings and added another washer to each side. Now the head doesn't have any play in it and is rock solid in flight and hover. The Vbar is much happier.
RV 24 September 2015 23:1124.09.2015 23:11
Well done!

I was talking to Kirtsten Zodtner about this thread on Tuesday this week (visited her) - and we were both curious about the result.

:-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
rwilabee 25 September 2015 07:0125.09.2015 07:01
I only have Carina Thrun's e-mail. Maybe you can let Kirsten Zodtner know what I posted. I used one hard O'Ring on each side in place of the softer one and one more .3mm washer on each side. Absolutely firmed up the head.

Thanks



RV schrieb:
-------------------------------------------------------
> Well done!
>
> I was talking to Kirtsten Zodtner about this
> thread on Tuesday this week (visited her) - and we
> were both curious about the result.
>
> :-)



3 mal bearbeitet. Zuletzt am 25.09.2015 07:08 von rwilabee.
VStabi VStabi Pioneer of Flybarless