← VBar NEO for external transmitters

vbar neo newbie questions translated

VBar › VBar NEO for external transmitters · Started by ReadyToFly on 9 October 2015 01:3009.10.2015 01:30
ReadyToFly 9 October 2015 01:3009.10.2015 01:30
hey guys,
i've just received my 1st Neo that i'll use with a futaba 8fg radio. i noticed the software is very similar to the 5.3 version, but there are some small differences and i have a few questions, please:
1) I noticed i can't inform the max. desired head speed on the gov2 tab anymore. where should i do that?
2) is the use of bank switch mandatory now? in which circumstances should i use it?
3) how else does it differ from the 5.3 version that i need to be aware of?
thanks a lot.



1 mal bearbeitet. Zuletzt am 09.10.2015 01:31 von ReadyToFly.
RV 9 October 2015 07:3809.10.2015 07:38
As all settings and the complete handling is according to VBar Control usage - it is mandatory needed to work with banks. One bank has one headspeed.

This is the main difference in the handling for you from 5.3 (except rescue switch, seperate collective min/max etc.)

We have a full setup example for my T8 here:

http://vstabi.info/en/node/1946

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ReadyToFly 9 October 2015 19:2809.10.2015 19:28
hello rv,
the 8fg example is for a nitro heli. is it the same for an electric one?
in the example, is the SE switch for flight modes and the SG for throttle hold?
i've never been fond of banks so i still can't see how to determine the value of the TC.
thanks.



1 mal bearbeitet. Zuletzt am 09.10.2015 20:00 von ReadyToFly.
RV 9 October 2015 21:1309.10.2015 21:13
Yes it is the same, but you can skip the extra "Throttle Cut" (SE) switch ;-)

SE is for Banks (keep in mind the same as a flight condition)
SG is for Motor off, on, or Autorotation (Center - must be on before)

Just according to the VBar Control ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless