← VBar NEO for external transmitters

VBar NEO higher power requirements than Silverline? translated

VBar › VBar NEO for external transmitters · Started by swalko on 15 October 2015 07:1715.10.2015 07:17
swalko 15 October 2015 07:1715.10.2015 07:17
It is possible that same setup but with NEO have higher requirements on power supply? I used Silverline few years and newer seen message with low power supply voltage in log when connected to Kosmik BEC. Yesterday i got NEO and when i played with setup and TX programming i seen few low voltage warnings. If i move sticks hard there are voltage under 4.5v and voltage under 4.0v messages in log. Despite warnings from log everything works correctly. Configuration: Kosmik 200, BEC voltage set to 5.6V, NEO, 3xBLS352, BLS251, R6203SB. Tested on bench, so without mechanics resistance.



3 mal bearbeitet. Zuletzt am 15.10.2015 08:27 von swalko.
swalko 15 October 2015 22:2215.10.2015 22:22
After few tests it seems like NEO voltage monitoring is more sensitive. So i replaced both long Kontronik BEC cables with only one short servo cable. With maxed collective/cyclic travels, maxed cyclic ring and maxed collective pumping log is still clear after about one minute long test.



1 mal bearbeitet. Zuletzt am 15.10.2015 22:23 von swalko.
RV 15 October 2015 23:0115.10.2015 23:01
Ok - thanks for testing. The NEO has a better measuring at all (faster and more precise). This is what you see - and it rerpresents the reality a bit better than the silverline.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless