Vetequk
20 October 2015 21:0320.10.2015 21:03
I am currently setting up the neo & i am unsure if on how to setup the throttle curves. At present the setup is as follows:-
Bank 1 throttle at 0% at all 5 points
Bank 2 throttle at 60% at all 5 points
Bank 3 throttle at 100% at all 5 points
Hold throttle at 55%.
Do I now check the headspeed for bank 2 at 0% pitch & if it matches my requirements create a 3 point v curve (Point 1- 100%, Point 2-60%, Point 3-100%.
Thanks
RV
20 October 2015 21:2620.10.2015 21:26
Kepp in mind that we have VGov with interneal TC.
You just need to give us either a "Stop", Run" or "Idle (AR)" status by switch.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 20.10.2015 21:33 von RV.
Vetequk
20 October 2015 22:1320.10.2015 22:13
So what you are saying is just set banks 2 & 3 to 100% on all point ( this would equal to run)
Bank 1 0%; on all points (this would = stop)
Throttle hold 60% ( this would = idle)
Is that correct?
Thanks
RV
20 October 2015 22:3120.10.2015 22:31
The motor switch is independend from the bank switch ... - so you can select different banks/headspeeds in flight.
But - both (bank and motor) "Channel" must represent -100 - 0 - +100% as value for correct motor or bank functionality.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Vetequk
22 October 2015 09:3622.10.2015 09:36