I'm using the Mac version of the VBar NEO 6.1 application and any time I try to save log data, I end up with a zero length file even though the window shows log data. I've confirmed the issue with one other person.
← VBar NEO for external transmitters
Issue with data log saving on a Mac translated
VBar › VBar NEO for external transmitters ·
Started by TheBum on 9 November 2015 04:0909.11.2015 04:09
TheBum
9 November 2015 04:0909.11.2015 04:09
Eddi E. aus G.
9 November 2015 08:4209.11.2015 08:42
Hi,
you probably have an older version of the VBar software. Please download anew from here, move the key file from your current software to the newly downloaded App, delete the old one, then it should work. I have just tried.
By the way, no need to install the drivers anew, you only need the VBar NEO 6.1 App new.
Kind regards
Eddi
Born to fly ...
forced to work.
you probably have an older version of the VBar software. Please download anew from here, move the key file from your current software to the newly downloaded App, delete the old one, then it should work. I have just tried.
By the way, no need to install the drivers anew, you only need the VBar NEO 6.1 App new.
Kind regards
Eddi
Born to fly ...
forced to work.
TheBum
9 November 2015 15:0709.11.2015 15:07
I just downloaded the latest version and when I attempt to run the VBar Control Manager, I get an error message saying that the application is damaged (see attached). I've tried downloading three times and always the same error.
Eddi E. aus G.
9 November 2015 15:3109.11.2015 15:31
Hi,
did you read the read me.txt file?
Quote:read me.txt
In case your Mac prompts
'VBar Control Manager can't be opened because it is from an unidentified developer'
or
'VBar Control Manager is damaged and can't be opened. You should move it to the trash',
please follow this little guide:
. Copy VBar Control Manager to your /Applications directory
. Open System Preferences
. Select Security
. Click the lock to make changes, enter your admin password
. Temporarily select 'Allows apps downloaded from:' and 'Anywhere'
. Open VBar Control Manager
. Set your Security settings back to e.g. 'Mac App Store and identified developers'
. Now the VBar Control Manager will always start without this workaround
The same works for the VBar Software.
Kind regards
Eddi
Born to fly ...
forced to work.
1 mal bearbeitet. Zuletzt am 09.11.2015 15:31 von Eddi E. aus G..
did you read the read me.txt file?
Quote:read me.txt
In case your Mac prompts
'VBar Control Manager can't be opened because it is from an unidentified developer'
or
'VBar Control Manager is damaged and can't be opened. You should move it to the trash',
please follow this little guide:
. Copy VBar Control Manager to your /Applications directory
. Open System Preferences
. Select Security
. Click the lock to make changes, enter your admin password
. Temporarily select 'Allows apps downloaded from:' and 'Anywhere'
. Open VBar Control Manager
. Set your Security settings back to e.g. 'Mac App Store and identified developers'
. Now the VBar Control Manager will always start without this workaround
The same works for the VBar Software.
Kind regards
Eddi
Born to fly ...
forced to work.
1 mal bearbeitet. Zuletzt am 09.11.2015 15:31 von Eddi E. aus G..
TheBum
9 November 2015 16:3909.11.2015 16:39
That's just strange. I've never seen the "damaged" message before relative to the Security settings and I've been using OS X since its inception. I got the expected "unidentified developer" message with the VBar NEO 6.1 app and was able to open it straight from the Security settings pane, which is what I typically do. I was expecting the same from the VBar Control manager app.
Thanks for the assistance.
Thanks for the assistance.
Eddi E. aus G.
9 November 2015 16:5009.11.2015 16:50
Hi,
this is really strange indeed. But I had something similar here, when making up the Mac software: I never got the message until I deleted the whole stuff once and packed, then unpacked my own 'creation' and started it ...
Anyway, does the event log thing now work?
Cheers
Eddi
Born to fly ...
forced to work.
this is really strange indeed. But I had something similar here, when making up the Mac software: I never got the message until I deleted the whole stuff once and packed, then unpacked my own 'creation' and started it ...
Anyway, does the event log thing now work?
Cheers
Eddi
Born to fly ...
forced to work.
TheBum
9 November 2015 20:3109.11.2015 20:31
I haven't had a chance to test it yet. I was doing the update before going to work and ran out of time.
TheBum
10 November 2015 04:2110.11.2015 04:21
The data log saves successfully with the new version. I noticed it's just a plain text file now instead of PDF., which is fine with me.
1 mal bearbeitet. Zuletzt am 10.11.2015 04:21 von TheBum.
1 mal bearbeitet. Zuletzt am 10.11.2015 04:21 von TheBum.