← VBar NEO for external transmitters

vbar neo gov - autorotation bail out questions translated

VBar › VBar NEO for external transmitters · Started by ReadyToFly on 26 November 2015 19:0926.11.2015 19:09
ReadyToFly 26 November 2015 19:0926.11.2015 19:09
hey guys,
1) is auto rotation bail out mandatory on vbar neo? unlike silverline, i didn't have to select it, but it is working. can it be deactivated if i want?
2) is it possible to have "auto rotation enable" checked on the castle creation esc and, at the same time, use the vbar neo governor? if not, what would happen if i did?
thanks.
RV 26 November 2015 22:2326.11.2015 22:23
Quote:1) is auto rotation bail out mandatory on vbar neo? unlike silverline, i didn't have to select it, but it is working. can it be deactivated if i want?

Just program 0% - or - set the motor switch in a way it won't send "center".

Quote:2) is it possible to have "auto rotation enable" checked on the castle creation esc and, at the same time, use the vbar neo governor? if not, what would happen if i did?

Our 3 "tested" modes are here:

http://www.vstabi.info/en/cc

CC Autorotation and our gov mode was incompatible when we testetd it.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless