← VBar NEO for external transmitters

Neo connection issue translated

VBar › VBar NEO for external transmitters · Started by fastflyer20 on 28 November 2015 04:3328.11.2015 04:33
fastflyer20 28 November 2015 04:3328.11.2015 04:33
Hello,
I am new to Neo, but not to Vbar.
Per the instructions, PC software was updated, Neo was registered, a key was created and copied into the Vstabi directory.
Windows reports the driver was installed correctly, USB shows green in Vstabi 5.3 but the Neo will not connect to the software.
Vstabi 5.3 was started, then the RX powered Neo was connected.
Attached are screen shots which indicate everything loaded correctly.

Any help on what to try next would be appreciated.

JohnTC02 28 November 2015 09:4928.11.2015 09:49
Looks like you are using VStabi 5.3, isn't there a v6 for the Neo as v6 is the version on the Neo.

Edit:
Yep, just checked mine, VStabi v6.17, you need to download the latest version.



1 mal bearbeitet. Zuletzt am 28.11.2015 09:52 von JohnTC02.
RV 28 November 2015 11:2828.11.2015 11:28
http://www.vstabi.info/en/node/1855

:-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
fastflyer20 29 November 2015 15:0829.11.2015 15:08
I must be blind! I never saw the Neo ikon.

All ready to start setup.

Thanks
Tom
VStabi VStabi Pioneer of Flybarless