← VBar NEO for external transmitters

Futaba T10CHG Neo setup trouble translated

VBar › VBar NEO for external transmitters · Started by unknown on 23 December 2015 13:4023.12.2015 13:40
unknown 23 December 2015 13:4023.12.2015 13:40
Hello,

My friend is trying to set up his new Neo on his Goblin 570 using s-bus along with the Futaba T10CHG radio. We have tried following the steps described here: http://www.vstabi.info/en/node/1946 but his radio has different menus and we can't figure out how to reassign channels 1-5 to match what's shown on the T8's Function menu.
His servos have power but do not respond to any inputs.
Vstabi Neo shows stick input on the pc but no servos move.
We cannot get the esc to arm.
The left stick moves both the pitch and throttle switch.

Please help of you can.

Steve
RV 23 December 2015 14:1123.12.2015 14:11
Quote:His servos have power but do not respond to any inputs.

Did you click on "new model" once in the wizard ? - i guess not ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
unknown 23 December 2015 22:2323.12.2015 22:23
You are right. He says:"I can't believe it is that easy now. I did that step once perhaps it was before it was communicating properly. I am relieved somewhat but will be obsessed"
VStabi VStabi Pioneer of Flybarless