← VBar NEO for external transmitters

Servos go crazy translated

VBar › VBar NEO for external transmitters · Started by jimwardle on 23 December 2015 03:2023.12.2015 03:20
jimwardle 23 December 2015 03:2023.12.2015 03:20
Hi, I have a problem with my new Neo. I registered it and upgraded to pro with rescue.When I came to setup the heli when I plugged the power in all the servos's went crazy until it initialized then it worked perfect.I have completed the setup and it is ready to fly but I don't want to damage the servo's the way it boots up.So far I have changed the rx and the sbus lead and plugged in another set of servo's ans still get the same crazy servo action until it finishes initializing. Last thing I did was to remove the Neo and fit a MiniVbar and then it boots up perfect.My setup is:
Goblin 570
TX = Futaba 18SZ
RX = Futaba R7008SB
ESC = Castle Talon 120HV running 5000mah 6S battery.
Servo's = BK DS7002HV on cyclic and a BK ds7006HV on the tail.
I have the esc plugged in AUX3 so I could calibrate.Tried plugging into the esc socket but couldn't calibrate and the servo's went berserk just the same.I have another Neo in my Goblin 700 but would prefer not to have to remove it as it would be a major job.Would much appreciate any help.
Regards
Jim Wardle
RV 23 December 2015 07:1623.12.2015 07:16
Hello Jim,

in general - we don't send any output until the init is finished.

But - lets do some research:

- is it the same with one servo only?
- is it the same with other servo brands?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jimwardle 23 December 2015 08:4023.12.2015 08:40
Hi, just made a major break through.If I connect at low throttle setting on my TX servo's go crazy until initialize.If I connect up with the TX throttle set mid or full boots ok.Does that give a clue to the problem ?
Cheers
Jim
RV 23 December 2015 09:2523.12.2015 09:25
Can you please have a look in the event log?

Which mode is the RX set up and which socket is used for the SBUS to Vbar?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jimwardle 23 December 2015 09:4423.12.2015 09:44
Mode B and set to sbus 1.Event log is normal as problem occurs before initialization.I think the esc is storing power and sending power to the servo's before Neo connects.No problem if I swap neo with MiniVbar ?.
Regards
Jim
Vinger 23 December 2015 09:4523.12.2015 09:45
BK servos have high power demand on startup, what BEC are you using?

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
jimwardle 23 December 2015 09:5623.12.2015 09:56
My ESC is a Castle Talon 120HV with an integral 20amp bec. I had no problem using MiniVbar ?
RV 23 December 2015 10:0523.12.2015 10:05
Quote: - is it the same with one servo only?
- is it the same with other servo brands?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jimwardle 23 December 2015 12:1223.12.2015 12:12
Hi,unfortunately I only use BK servo's now .My Goblin 700 has the earlier BK high voltage servo's which work perfect with my First Neo I purchased.That was the main reason I got the second one as the rescue function has given me a lot more confidence trying new maneuvers.It works faultlessly but the only difference is the heli runs a separate. power supply for the rx,fbl and servo's.My main concern is if I remove the Neo and fit a MiniVbar it works perfectly indicating a possible faulty unit.Am I going to cause damage to the servo's if they go crazy,twitching and jerking before the Neo initiates.The way it boots up is something I have never experienced before in my twenty plus years experience flying r/c aircraft and helicopters.
Jim
RV 23 December 2015 12:3123.12.2015 12:31
Quote:My Goblin 700 has the earlier BK high voltage servo's which work perfect with my First Neo I purchased.

OK - can you mount this NEO ioto the other one (just for a check).

I know that there are several series of the BK's out - even if they have the same Label and Type - and this is what i want to know ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jimwardle 24 December 2015 02:1824.12.2015 02:18
Hi,I have removed my first neo from my Goblin 700 and fitted it in place of my new neo and the servo's react the same,they go crazy until it initializes.I also fitted my new neo to my 700 and it boots perfect.As you suggested which proves that my new neo is not faulty.What do I do now ?.Do I use the new neo and put up with servo's going crazy.The servo's are getting uncontrolled power from the esc before the neo initiates.I am using AUX3 for the throttle as I can calibrate end points to arm the esc.If I plug the esc into the socket marked esc on the neo I cannot get the esc to arm.Any idea's ?
Regards
RV 24 December 2015 11:0524.12.2015 11:05
You should contact BK and swap the servos for good ones from another production batch ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless