← VBar NEO for external transmitters

Jeti and Vbar Neo translated

VBar › VBar NEO for external transmitters · Started by subzero on 10 January 2016 09:0610.01.2016 09:06
subzero 10 January 2016 09:0610.01.2016 09:06
Hi All

I'm having some issues setting up my Neo.

I've started on the first tab and worked my way through up the Servos tab.
I cannot seem to get the servos working after plugging them in according to layout. The servos basically power up and go to centre.

I've got the bank switching working - 1, 2, 3. The motor switch is working - Stop, Idle and Run.

I'm sure I'm doing something basic wrong.

Any ideas?

Thanks
RV 10 January 2016 09:2110.01.2016 09:21
You did not start with the "new setup" button ;-(

This must be done once to set all initial values ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 10.01.2016 09:22 von RV.
subzero 10 January 2016 09:4210.01.2016 09:42
Hi Rainer

It looks like it is solved - I did a complete setup from the beginning again and now it works

Thanks
VStabi VStabi Pioneer of Flybarless