← VBar NEO for external transmitters

How do I upload the key file fpr a second neo translated

VBar › VBar NEO for external transmitters · Started by David Heath on 20 January 2016 20:2120.01.2016 20:21
David Heath 20 January 2016 20:2120.01.2016 20:21
How do I upload the keyfile fpr a second neo

I have tried to follow the istructions and they are not making sense. I managed to upload the keyfile for my first Neo ok but when I try to follow the instructions for the second its not working.

I'm using a Macbook
David Heath 20 January 2016 20:2220.01.2016 20:22
David Heath schrieb:
-------------------------------------------------------
> How do I upload the keyfile fpr a second neo
>
> I have tried to follow the istructions and they
> are not making sense. I managed to upload the
> keyfile for my first Neo ok but when I try to
> follow the instructions for the second its not
> working.
>
> I'm using a Macbook
Eddi E. aus G. 21 January 2016 08:2121.01.2016 08:21
Hi David,

the key file always contains all serial numbers of the devices currently registered to you, at the time of the download.

So if you register a second NEO, just download the file again, replace the old one, and you can set up both.

Kind regards

Eddi

Born to fly ...
forced to work.
David Heath 21 January 2016 21:0321.01.2016 21:03
Hi Eddi,

Thanks for that, the problem is I can't find where to put it on the mac program, or find the old file, I think a link came up telling you to add the key file before which is no longer there. When I follow the instructions on vstabi I can't even see the old one...
Any more clues please?

Regards,

Dave
David Heath 22 January 2016 22:2422.01.2016 22:24
Still need help... :-(

I have found where the key file is stored, I have deleted it, down loaded a new one with the second neo in the list on vstabi in my devices. I have put the new keyfile in the place keyfile here folder, disconnected the power, pulled out the jumper plug, loaded the program, powered up the vbar and a box comes up telling me that the connected unit is not found in my list of units. go to vstabi and download a new keyfile,

I have tried this a couple of times using my macbook. But it wont work, what am I doing wrong?

Dave
RV 23 January 2016 05:3723.01.2016 05:37
ist the keyfile named correctly? - some download managers will add a index number at the end ....

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
David Heath 24 January 2016 00:3024.01.2016 00:30
All working now thank you. Yes indeed it was the file name being the problem.
VStabi VStabi Pioneer of Flybarless