← VBar NEO for external transmitters

Vbar neo gov kontronik logo690 translated

VBar › VBar NEO for external transmitters · Started by TommyH on 26 January 2016 13:4926.01.2016 13:49
TommyH 26 January 2016 13:4926.01.2016 13:49
Hi.

I have a vbar neo with dsmx sat, dx8.
Everything is working fine.
helijive is set to mode 4.
The problem is that i need to set low throttle outputs to get desired headspeed on my logo 690. Stock setup.
1600,1800,2000 is set to 18,38,58.
Dont know why i get those nummers?
Any tips on the problem?

Maybe i buy a rpm spektrum sensor and run vbar gov.
Is that a better solution?

Best regards Tommy
Eddi E. aus G. 26 January 2016 14:3126.01.2016 14:31
Hi Tommy,

what motor are you running, what cell count, what pinion? Just to make sure I have the proper numbers for my calculation.

Did you measure the actual head speeds?

58 % for 2,000 sounds not too far off, the optimal throttle value for a Kontronik is about 65 % so you have enough headroom for it governing the headspeed, from full to empty battery.

Kind regards

Eddi

Born to fly ...
forced to work.
TommyH 26 January 2016 15:4026.01.2016 15:40
Hi Eddie!
Its all stock with 15t motor pinion, main gear 106t, 12s 5a, The motor is Scorpion hk4525-370kv.
Yeah 58 sounds ok, its the 18% that sems low.
Havent got that mutch difference before on logo550 or gaui x3 but with yge. Maybe its normal.
I used a tachometer.
Tommy
Eddi E. aus G. 27 January 2016 08:2027.01.2016 08:20
Hi Tommy,

with the Kontronik, or with governors in general, it's not linear. IIrc, the Kontronik starts up at around 12-15 % and goes into the lowest rpm it can, then.
Kontronik afaik still states you should choose your gear ratio in a way that you can not take off at this lowest rpm, but with today's setups that's hardly possible, without limiting the max. head speed you can achieve.

All well, imo.

Kind regards

Eddi

Born to fly ...
forced to work.
TommyH 27 January 2016 20:1127.01.2016 20:11
Great to know! Then its all ready to fly :-)
Thanks for the answer.
VStabi VStabi Pioneer of Flybarless