← VBar NEO for external transmitters

VBar/Neo latest firmware revision translated

VBar › VBar NEO for external transmitters · Started by enterpryse on 21 March 2016 15:1121.03.2016 15:11
enterpryse 21 March 2016 15:1121.03.2016 15:11
Now this may just be my set up and a little stupidity on my part but after updating the firmware on the VControl the bail out failed miserably.

"VBar NEO Rescue App Improved maloperation handling" & NEO Rescue App | VStabi

My NX7 was flying great, lots of FFF , loops, stalls and flips without a hiccup. then I lost orientation for a moment and to check I was where I thought I was I hit the chicken switch. The machine then pyro'd, went inverted and accelerated towards the ground like a bat out of hell .. I almost saved it but about 15ft up I lost power and bladespeed, it went in skids first. Not much damage luckily. I'm thinking instinct told me to cut power before it hit

Anyway, the only thing I'd changed from previous flights is to upgraded firmware , what I didn't do was reset the rescue settings for the bailout. So either I was chucking it around and vibes got to it or the firmware upgrade did some nasties.

When I can I'll check the logs and post an update.

So I'll be resetting all the rescue calibrations my Neos now just in case!
Vinger 21 March 2016 19:1821.03.2016 19:18
We have had very little success with the Neo on the Gaui NX7, there is a thread on it here and basically it has to do with vibrations particular to that model that stuffs up the rescue.

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
enterpryse 22 March 2016 16:1522.03.2016 16:15
Vinger Wrote:
-------------------------------------------------------
> We have had very little success with the Neo on
> the Gaui NX7, there is a thread on it here and
> basically it has to do with vibrations particular
> to that model that stuffs up the rescue.


Hmmmm...... not good
enterpryse 23 March 2016 20:3623.03.2016 20:36
OK, the LOG.

16:32:02;4;Extreme Vibration Level
16:32:05;2;Bailout Start
16:32:06;4;Aileron Sensor Value out of Range
16:32:06;2;Bailout End
16:32:07;2;Bailout Pilot Oversteer
16:32:07;2;Governor Stop
ulrich 23 March 2016 20:4723.03.2016 20:47
Please post complete logs, do not edit or short them. Thx.

so long ... Uli
http://www.vstabi.de
VStabi VStabi Pioneer of Flybarless