← VBar NEO for external transmitters

Head speed setting on radio translated

VBar › VBar NEO for external transmitters · Started by ian Spencer on 23 March 2016 17:2423.03.2016 17:24
ian Spencer 23 March 2016 17:2423.03.2016 17:24
Hi,

On the Neo is there a way of adjusting head speed on radio using external governor like on the V5?
I had flat throttle curves so by adjusting flat line I could adjust the head speed and the ESC did the rest
I have a Logo 600SE with a Kontronik Jive ESC and Kontronik Pyro 700-45 motor.

At the moment, I have external governor set and have different % set in each bank so as to select a head speed.

Also, could you advise on what you feel is a sensible head speed for general flight - little to none aerobatics.

Thanks,

Ian
RV 23 March 2016 18:2023.03.2016 18:20
Yes it is - just Read here:

http://vstabi.info/en/neo_transmitter

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ulrich 23 March 2016 18:2323.03.2016 18:23
If you use an Jive or another external governor, you simply do not need the vbar in the loop for the ESC. Just plug it into the receiver directly, or if you use as sat only setup, use i.e. aux3 as throttle channel.
So you can set up the headspeed from your Transmitter.

The possibility to set fixed percentages to banks for ESC is needed for VBC since it uses a different setup method. You can use it for convenience, but its not mandatory.

so long ... Uli
http://www.vstabi.de
ian Spencer 24 March 2016 10:1124.03.2016 10:11
Thank you guys,

Regards,
Ian
VStabi VStabi Pioneer of Flybarless