← VBar NEO for external transmitters

Flashing red and green translated

VBar › VBar NEO for external transmitters · Started by nosler on 26 March 2016 10:2926.03.2016 10:29
nosler 26 March 2016 10:2926.03.2016 10:29
Hi Trying to set up new neo,
I have linked to manager and updated , i have down loaded and put in new keyfile, the neo shows in my devices , but still flashing red and green and will not allow me to bind with v control,

Please help
RV 26 March 2016 11:1826.03.2016 11:18
Which serial number is the NEO?

Is it a NON-VLink Neo with external Sat (as this forum is named here)?
If yes - where is the sat connected (post image)?

Can you access the bind menue in VBC?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
nosler 26 March 2016 11:3226.03.2016 11:32
Hi Rainer,
Its the Neo with external RX
No i cannot access the bind menu on VBC it says bind with a line thro it.
I can't seem to upload a photo but i have connected the same as on my other neo which works fine with VBC
Looking from above plugged in to AUX 2/3 with the 2 grey wires to the top .
Serial number is 20005837

jj
ulrich 26 March 2016 11:3826.03.2016 11:38
Switch off your motor switch, otherwise the bind menu will be disabled!

so long ... Uli
http://www.vstabi.de
nosler 26 March 2016 11:4926.03.2016 11:49
OMG AS SIMPLE AS THAT ..........

Thanks Uli, goodness knows how i missed that switch........
But i did ..

Thanks for your help :-)
VStabi VStabi Pioneer of Flybarless