← VBar NEO for external transmitters

Problem with collective inputs and tail

VBar › VBar NEO for external transmitters · Started by above on 11 April 2016 22:4611.04.2016 22:46
above 11 April 2016 22:4611.04.2016 22:46
Hi I have a problem with the tail

HELI: Gaui X5
BLADE: RJX 520mm
BLADE TAIL: 82mm plastic

The problem is pitch inputs (+ or -). The tail is moved to the few centimeters. The tail gain is 110 and still have this problem, I have also increased the collective DMA to 85.

This happens to me also another NEO mounted on a Goblin 630 SAB

I think it's a problem of adjustment as I can solve?


The DMA cyclic serves to correct the tail with cyclic entries?
ulrich 12 April 2016 12:1112.04.2016 12:11
The tail moves a few centimeters when load is applied, thats normal. The increased load readjusts the ballance of the heli, resulting in some small movements.

It of course can be reduced by adjusting the DMA, but i would recommend not doing it too much, since theses inputs add some dynamic disturbances as well. So its a tradeoff, but never can be 100% invisible.

so long ... Uli
http://www.vstabi.de
above 12 April 2016 12:1612.04.2016 12:16
The videos are not mine

But it is the fault I have in my system FBL Neo, it happens in all helis that amount will NEO


Failure pitch:
https://www.youtube.com/watch?v=lmdwBfkD8T4

Failure ailerons:
https://www.youtube.com/watch?v=UwEYuy1c20k

I received the mechanics and servo right, the servo is a fast SAVOX
RV 12 April 2016 20:0512.04.2016 20:05
First - check 2 general things on the bench:

Coming from zero collective - the tail thrust must increase against the torque (on a CW heli the same direction as for nose/stick right). Does it? (possibly increase DMA to see better) - it must also go in the same direction for a cyclic input.

Then if unwanted tail movements happen they can be reasoned in the zero collective point. So lets check:

- swashplate trim tab
- fold blades - are the tips on the same height?
- if not - trim unless they are (post result)
- collective tab
- use stick now to get then on equal height again
- keep stick there (fold blades back for less stress on servos)
- flight, tail expert
- set zero collective
- post the value

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless