← VBar NEO for external transmitters

Help with setup, neo/controller/HBL990 keeps oscillating

VBar › VBar NEO for external transmitters · Started by Micke.Wennberg on 13 April 2016 19:5913.04.2016 19:59
Micke.Wennberg 13 April 2016 19:5913.04.2016 19:59
Cant get my tail to stop oscillating.

Wich tail servo setup should i choose in the setup?

Even tried different brands of tail servos. But now i have the mks hbl990. Also tried all different "gain" values for the tail.

It flies just fine. But it oscillates when i hoover.

Goblin 500/Neo/Controller/HBL990
RV 13 April 2016 20:4913.04.2016 20:49
760 us and 333 hz will be right.

About the tail - if a gain change won't have effect - it is almost reasoned in mechanics. Please check Tail slider, thrust bearings etc.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless