← VBar NEO for external transmitters

Vbar Neo Rescue Malfunction and Crash translated

VBar › VBar NEO for external transmitters · Started by rasheem on 6 April 2016 19:4006.04.2016 19:40
rasheem 6 April 2016 19:4006.04.2016 19:40
Hello,

One of my friends faced with some strange behaviours related with Vbar Neo. But, he continued his flights. Eventually, he crashed his Goblin570.

When i look over the logfile, there are a lot of rescue activations that a man can not perform so quickly as in vbar neo log.

In all flights, there are too many rescue activations, some "cyclic ring is active" messages, some "Aileron Sensor Value out of Range" messages etc.

What he told me is; heli behaves unnatural during rescues, not climbs vertically from hover. Instead, heli climbs with some elevator or aileron, angled to the front or sideway...

I attached the logfile.


What can cause this problem? Could there be a defective sensor in vbar neo or something else? Dateianhänge:
öffnen | Download - log-20004707-Apr-5--2016-8-34-10-PM.zip (1.7 KB)
Fingolf 6 April 2016 20:1506.04.2016 20:15
Check the switch configuration from the tx.
It seems the rescue will be triggered permanently.

Stephan
rasheem 6 April 2016 20:5906.04.2016 20:59
Hi Stephan,

Radio system is Spektrum DX9.. And rescue function is assigned to the pushbutton.

Actually, he has flights more than 4-5... But, logfile contains only 4 flights before crash...

He performed a version update days ago. Are logfiles reset while updating vbar neo? I'm pretty sure he has more than foru or five flights.

And he was used rescue function without any problem before... But last flight's logs don't seem ok.
ulrich 6 April 2016 21:2306.04.2016 21:23
Please doublecheck the rescue switch channel. It looks there is something wrong with it.
Try to reproduce the effects on the bench to see if it happens there as well.
It looks that it is triggered as soon as the motor is switched on. Maybe from some trange noise, maybe from not properly configured.

Logfiles are not deleted, but they are overwritten after some time (cyclic buffer)

so long ... Uli
http://www.vstabi.de



1 mal bearbeitet. Zuletzt am 06.04.2016 21:24 von ulrich.
rasheem 7 April 2016 07:3907.04.2016 07:39
Thank you Ulrich,

We will check all possibilities soon. We'll configure a new setup with a new transmitter, on another (and cheap) subject model (450size)...

I also suspect from a transmitter setup but we'll see. I'll keep this topic informed.

Best regards,

Rasim.
mkucuksari 19 April 2016 15:3919.04.2016 15:39
Hi Everyone,

Here is some new news. Our friend who deals this problem visited us during last weekend.

For test purpose he has installed the neo at a new kit, TREX 450L.
After checking and being sure that the setting and configurations were correct, we made some test flies.
We had some tail gain issues which was normal, but except that including the rescue system, everything worked perfect until the last fly !!

During the last fly, when we pressed rescue, suddenly heli behaved unnatural and not climbs vertically. But we were lucky when we compare to first event and without any problem we land it.

In order to understand what was going on, we wanted to check the log file and try to connect to PC but not able to...

As you can see from video and log file, the unit can not Initialize and gives "IMU Sensor failure".

https://www.youtube.com/watch?v=k-vKiKpLhZ4

What is your suggesting ?

Regards Dateianhänge:
öffnen | Download - Vbar Neo Logs Fatih_170416.zip (1.2 KB)
RV 19 April 2016 17:4519.04.2016 17:45
Please open a service RMA by clicking on the service button at the regarding device in your list. I think the service wants to have a look on this unit.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mkucuksari 20 April 2016 09:2920.04.2016 09:29
Hi RV,

Thanks for your reply. My friend has opened a service RMA. Wonder what the service will find.

Regards
VStabi VStabi Pioneer of Flybarless