← VBar NEO for external transmitters

NEO and Spektrum DX8 : some problems translated

VBar › VBar NEO for external transmitters · Started by mgaproduction on 14 June 2016 20:0914.06.2016 20:09
mgaproduction 14 June 2016 20:0914.06.2016 20:09
Hy guys
I've some problems and i ask you the solution.
The first problem is :
I followed these instructions http://vstabi.info/en/node/1990 but i can't made the limits ot he ESC (hobbywing 160A V4) because (i think) it doesn't receive the 100% signal of the throttle.
Can sameone help me?
Thanks
RV 14 June 2016 20:1214.06.2016 20:12
Quote:because (i think) it doesn't receive the 100% signal of the throttle.

Simple trick:

Use a old servo as a pointer to be sure ;-)

Check it in gov 2 with enabled "direct" output - and ensure that collective is +-100% before that!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




2 mal bearbeitet. Zuletzt am 14.06.2016 20:13 von RV.
mgaproduction 20 June 2016 19:2220.06.2016 19:22
I have solved the problem of the ESC.
I now have a much bigger problem: to properly move the swashplate, I had to reverse all channels and even the meaning of the sensor.
How can this thing?
I followed the settings written on the website for programming my DX8...
At this link https://picasaweb.google.com/102159214782977408547/6297999537425647425# you can see the problem. In particular the last 6 pictures.

Thanks
RV 20 June 2016 19:3720.06.2016 19:37
Quote:I now have a much bigger problem: to properly move the swashplate, I had to reverse all channels and even the meaning of the sensor.

Simply impossible if everything is set up according to our manual. Please check if Ch2 and Ch3 Servos are plugged in on the right sockets - according to the swash drawing.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 21 June 2016 08:3321.06.2016 08:33
Hi,

and please start with checking directions on the Transm. panel in setup, usually there's a reverse already there, too.
The bars _must_ move the directions the sticks go.

Kind regards

Eddi

Born to fly ...
forced to work.
mgaproduction 22 June 2016 22:2322.06.2016 22:23
I become crazy.
I followed your instructions another time (which are the same instructions that I have already done the first time. I have already set many times in the past minivBar and the sw is almost identical and the settings are the same too).
At this link you can find the pictures : https://picasaweb.google.com/102159214782977408547/6299110678628149265# .
The servos are physically connected properly as shown in the picture of the NEO sw. As you can see, everything matches perfectly, everything. The only reversed channel on the DX8 is the aileron. The swash plate corrects in the right directions and when I started the rescue, the swash plate snaps upward.
The sensor is oriented in the right direction with the cables toward the tail.
This was the first solution that i've used.
BUT with this solution there is the problem in "cyclic tab" in the NEO sw because in the 8-degree adjustment, the pitch goes negative and not positive as you can see from the picture of the blade.
I do not know what to do...
Eddi E. aus G. 23 June 2016 08:3523.06.2016 08:35
Hi,

think of the 8° in cyclic pitch setup as an unsigned number.
If everything else is set up and works properly, it does not matter if you see + or – 8° at the blade.
It's for calibration of the control loop only, anyway, so you get the same starting point in all kinds of setups, on all kinds of models.

Kind regards

Eddi

Born to fly ...
forced to work.
mgaproduction 29 June 2016 19:0529.06.2016 19:05
I'll try this configuration in a few days.
Another question : how is the difference from "rescue only", "beginner only" and "rescue and beginner" in the professional swash plate tab ?

Thanks



2 mal bearbeitet. Zuletzt am 29.06.2016 19:07 von mgaproduction.
RV 29 June 2016 21:4829.06.2016 21:48
Channel values:

-100: rescue trigger
0 - nothing
+100 - beginner mode

The beginner mode (if enabled) is used at +100 - and gives you a kind of tilt angle limit for beginners and their first hover training.

I use it for my buddys in their first flights and open up the limit from 50 up to 100 step by step.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 29.06.2016 21:49 von RV.
mgaproduction 29 June 2016 22:0929.06.2016 22:09
In other words?
The rescue mode levels the heli and gives positive pitch.
In the beginner mode the helicopter is put into hovering? Also if is it for example in inverted flight?
And in "rescue and begginer" mode ?



1 mal bearbeitet. Zuletzt am 29.06.2016 22:10 von mgaproduction.
RV 29 June 2016 22:3729.06.2016 22:37
The Rscue turns the heli skids down, levels it and moves it upwards.
The beginner mode is for normal hovering training. It can be used for beginners training only. Not for inverted.

Which mode can be acessed with a 3-way switch can be set up in the rescue panel.

If we choose both - we have rescue at -100, beginner at +100 and none at 0.
If we choose rescue - we have rescue at -100 and nothing at 0 and +100
If we chose beginner - we have nothing at -100 and 0 - and beginner at +100

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mgaproduction 3 July 2016 14:3303.07.2016 14:33
This morning i tested the first flights and all is ok.
But now i want to modify the "pitch pump" value but it's impossible. I set 60 instead 50 and when i change the bank, the value come back to 50 ...

Can someone help me?

Thanks
RV 3 July 2016 19:3503.07.2016 19:35
Please toggle through all banks to check - it is banked,. maybe you dialed in at another bank?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mgaproduction 3 July 2016 20:5503.07.2016 20:55
Whatever bank I set to value 60 (or others values), it returns to 50 when i return to bank 1...
RV 4 July 2016 06:1804.07.2016 06:18
Now i understand. PC Software is difficult ...

in VBC we have a hard limit with 50 - which is enough even for our team guys. So the dial won't allow to get more there in "Realtime".

In PC Software - we type, send - and the VBar decides while accepting about the limit (also 50) - but a Update on the screen isn't done imeediately.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mgaproduction 4 July 2016 08:1004.07.2016 08:10
So it's just a matter of screen refresh? I set the value, the sw accepts it but does not write it right away?
RV 4 July 2016 17:2104.07.2016 17:21
Yep - it writes 50 as it is the limit.

Is it essentially to dial in 60 or more? - Just a question, maybe i can put it on a list to be done.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mgaproduction 4 July 2016 22:2004.07.2016 22:20
It is not essential, but if a value can go up to X, it would be useful to be able to see the value written.
Just to avoid confusion and maybe to forget what the real value set.
If you've been wanting to make a change, personally I would be very grateful.
Thanks for all :-)
VStabi VStabi Pioneer of Flybarless