← VBar NEO for external transmitters

governor gain question - chirping sound when under load translated

VBar › VBar NEO for external transmitters · Started by ReadyToFly on 13 July 2016 23:3313.07.2016 23:33
ReadyToFly 13 July 2016 23:3313.07.2016 23:33
Hello guys,
I can hear that annoying chirping sound coming from the motor when the heli is under high load like hard climb outs, for example.
I've tried governor gain 25, 30 and 35 with no luck.
I've read conflicting information on how to solve it. Should I try higher or lower values, please?

This is the last flight log, just in case:

OK 0:00 Reset Reason: Power On
Info 0:07 Calibration Finished
OK 0:17 Good Health Message (10sec)
OK 0:27 Good Health Message (10sec)
OK 0:37 Good Health Message (10sec)
Info 0:41 Bank 2 Loaded
OK 0:51 Good Health Message (10sec)
Info 0:54 Governor Mode Pitch
Info 0:54 Motor Switch operated to Idle bailout
Info 0:54 Motor Switch operated to ON
Warn 1:04 High Vibration Level
Info 1:13 Raised Vibration Level
OK 1:23 Good Health Message (10sec)
OK 1:33 Good Health Message (10sec)
Info 1:41 Raised Vibration Level
Warn 1:50 High Vibration Level
OK 2:00 Good Health Message (10sec)
OK 2:10 Good Health Message (10sec)
OK 2:20 Good Health Message (10sec)
OK 2:30 Good Health Message (10sec)
Info 2:36 Raised Vibration Level
Info 2:45 Raised Vibration Level
Info 2:54 Raised Vibration Level
Warn 3:03 High Vibration Level
Warn 3:12 High Vibration Level
Info 3:22 Raised Vibration Level
Info 3:31 Raised Vibration Level
Info 3:31 Governor OFF
Info 3:31 Governor Mode Stop
Info 3:31 Motor Switch operated to OFF
Info 3:31 Motor Switch operated to Idle bailout
Info 3:35 Bank 3 Loaded
Critical 3:40 Extreme Vibration Level
Info 3:43 Governor Mode Pitch
Info 3:43 Motor Switch operated to Idle bailout
Info 3:43 Motor Switch operated to ON
OK 3:53 Good Health Message (10sec)
Info 3:58 Raised Vibration Level
Info 4:07 Raised Vibration Level
Info 4:17 Raised Vibration Level
Info 4:26 Raised Vibration Level
Info 4:35 Raised Vibration Level
Info 4:44 Raised Vibration Level
Warn 4:53 High Vibration Level
Info 5:03 Raised Vibration Level
Info 5:12 Raised Vibration Level
Info 5:18 Governor OFF
Info 5:18 Governor Mode Stop
Info 5:18 Motor Switch operated to OFF
Info 5:18 Motor Switch operated to Idle bailout
Info 5:21 Raised Vibration Level
Info 5:22 Bank 1 Loaded
Info 5:30 Raised Vibration Level
OK 5:40 Good Health Message (10sec)
OK 5:50 Good Health Message (10sec)
OK 6:00 Good Health Message (10sec)
Info 6:02 Governor Mode Pitch
Info 6:02 Motor Switch operated to Idle bailout
Info 6:02 Motor Switch operated to ON
OK 6:12 Good Health Message (10sec)
Info 6:16 Raised Vibration Level
Info 6:25 Raised Vibration Level
Warn 6:34 High Vibration Level
Warn 6:44 High Vibration Level
Info 6:46 Governor OFF
Info 6:46 Governor Mode Stop
Info 6:46 Motor Switch operated to OFF
Info 6:46 Motor Switch operated to Idle bailout
Warn 6:53 High Vibration Level


Thanks.
RV 14 July 2016 05:3314.07.2016 05:33
Maybe you could set another timing option? How are the possible values there?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ReadyToFly 14 July 2016 20:3114.07.2016 20:31
do you mean the ESC timing?
thanks.
RV 14 July 2016 22:1114.07.2016 22:11
Yep.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ReadyToFly 14 July 2016 22:1614.07.2016 22:16
the esc is a castle ice2 120hv. low, medium, high or custom (whatever i want) are the possible values. castle says nothing about using timing to fix such issue.

i thought i'd have to mess with neo's gov gain, collective dynamic or collective add. i've already tried them all with no luck, btw.
RV 15 July 2016 06:0615.07.2016 06:06
OK - and which value is currently set here?

Which motor is it?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ReadyToFly 15 July 2016 16:3915.07.2016 16:39
the motor is a scorpion 4025-1100kv.
the value is 'medium'.
thanks.
RV 15 July 2016 16:5715.07.2016 16:57
OK - it would be interesting how mand deg. this is ;-)

Can you try "Normal" with 5 deg?

http://www.vstabi.info/de/node/1533

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ReadyToFly 15 July 2016 19:5415.07.2016 19:54
hi RV,
the value for "motor timing" on my esc is actually "normal (5)". there is no "medium". sorry for the confusion.
don't know what you mean by "deg". is it the value for "motor timing"?
my esc settings are the ones on the link you've suggested. the only difference is that my cc is an ice2 120hv, not an edge.
thanks.
RV 15 July 2016 21:1215.07.2016 21:12
Yep - this is it. try 5 points (degrees) more or less and se if it has a effect.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless