MarkB
28 July 2016 21:2128.07.2016 21:21
Hi All,
Firstly can I apologise for my lack of understanding!
I've never used a governor before and do not fly 3d so don't really need to use this feature. I have a Vbar Neo pro rescue and can't seem to work out how to not use the governor. I just want to fly a throttle curve and not use the governor.
I've tried to attach my setup file but it doesn't like the format?
Many thanks,
Mark
RV
28 July 2016 22:0728.07.2016 22:07
You use a VBC or a 3rd party TX?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
MarkB
28 July 2016 22:1128.07.2016 22:11
Hi Rainer,
I'm using a DX9 Black Edition TX...
Many thanks,
Mark
RV
28 July 2016 22:1428.07.2016 22:14
No problem ...
If you use the "AUX3" method - you will have TC from TX ;-)
http://www.vstabi.info/en/neo_transmitter
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
MarkB
28 July 2016 22:4628.07.2016 22:46
Hi Rainer,
Many thanks for that. I think I may have sorted it but need to test tomorrow.
The issue I was having was switching from stop to idle to run wasn't working as it should. So when I switched from off to idle there was no difference in the servo movement.When I switched to run it went to the head speed set in the governor so was very harsh as it went from tick over to a high head speed very very quickly which was worrying!
I think I have it right now.
I switch my Th. cut switch ( Set as switch D, Gear )from Active to off. Then with my motor switch ( Set as switch G ) in the Off position ( position 2 ) the throttle servo moves to what looks like a tick over position. If I then move the switch to position 1 Idle it stays in the same place. I then move the switch to position 0 and the throttle servo seems to move gently opening the throttle ( I assume to find the head speed set in Bank 1, in my case 1500 as I don't want a fast head speed ). Once the throttle has opened if I move back to position 1 the throttle servo moves to a position higher than the tick over ( which I assume is a safe position to recover from when doing an auto? )
I hope this makes sense to you! :-/
As I say I've not used a governor before and so have been struggling with it. I will let you know how it goes when I can test it tomorrow!
Many thanks,
Mark
RV
29 July 2016 06:1029.07.2016 06:10
One thing - is it a nitro or a electric?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
MarkB
29 July 2016 07:5129.07.2016 07:51
It's a nitro, T-Rex 600n.
Cheers,
Mark
RV
29 July 2016 12:5729.07.2016 12:57
OK - then you definitely should use our Gov and connect the servo to ESC as it is supposed to be done.
Reason:
The AUX3 has a failsafe which gives NO pulse in FS condition. A ESC will shut off, a servo will be forceless but still stay in its position - so the motor will keep running. The ESC port will get into its defined FS in case of emergency (idle on a nitro).
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 29.07.2016 12:58 von RV.