racer-g
11 August 2016 18:2511.08.2016 18:25
Hi again.
My question is about cyclic optimizes.
I fly on 140 agility and optimizer doesn't go higher than 70 even when i type in manually.Less 70 it remembers but not higher than that.When i enter 75 and than switch banks it goes back to 70.
Is it normal?
Thanks in advance.
George.
ulrich
11 August 2016 21:4911.08.2016 21:49
Yes, the value is limited to 70.
so long ... Uli
http://www.vstabi.de
racer-g
12 August 2016 06:2612.08.2016 06:26
Thanks.
Does that mean i don't have to go thru optimization process after agility change(or any other mechanical setup changes) higher than 130-140 and i just type in optimizer 70 manually?
ulrich
12 August 2016 14:3212.08.2016 14:32
Just type in 70. Be careful at these agilities, its very close to the limit of the sensors, so if you increase a few points, it may lock out at full deflection. This will give the maximum rate, independant what the gyros say. Depending on the Heli, that can be too much ;-) Specially on mini and micro helis...
so long ... Uli
http://www.vstabi.de
racer-g
12 August 2016 16:4512.08.2016 16:45
Thanks again. Heli is Trex 550 stretched. Flies awesome but i need little more agility.
And also,can you confirm that Neo agility setting 140 is equal or near to 110 old style Vbar?
RV
12 August 2016 18:2712.08.2016 18:27
Needing more agility - check CR - is it opened as best as you can?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
racer-g
12 August 2016 18:3612.08.2016 18:36
CR 93-95.And i don't want to cheat the system setting up cyclic more than 8deg. :-) .
It's almost there(agility i want),i don't like too much head speed like 2500-2600 but maybe i have to try.
Thanks anyways.
RV
12 August 2016 19:0612.08.2016 19:06
Hmmm - consider about the blades - maybe there are more leight-weight blades or same weight with COG more inwards or more lead?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
racer-g
12 August 2016 20:2012.08.2016 20:20
Was flying with Align 3G and now switched them to Revolution.,They are 7gr lighter,COG same but more agile with them.
I said,i almost there :-) ,just was confirming that my optimizer settings are ok.
My biggest concern right now is that i can't fly good vertical square so i'm playing with agility.