Hey guys, I have a brand new Synergy N7 using Jr HV8917 servos and a Vcontrol radio. Yesterday when I was flying, total of 6 flights an I saw a elevator bobble so I landed and brought it home. When I look at the log this is what I see. I have a little noise in the tail which I believe is the bearing. I think this is the cause of the vibration. The part I am worried about is the out of range part. Any help is appreciated. Thanks in advance.
12:25:51;4;Aileron Sensor Value out of Range
12:25:51;4;Aileron Sensor Value out of Range
12:25:51;3;The Cyclic Ring is active
12:25:52;4;Aileron Sensor Value out of Range
12:25:55;4;Extreme Vibration Level
12:27:06;2;Raised Vibration Level
12:27:07;4;Elevator Sensor Value out of Range
12:27:07;4;Elevator Sensor Value out of Range
12:27:14;4;Aileron Sensor Value out of Range
12:27:14;4;Elevator Sensor Value out of Range
12:27:14;4;Aileron Sensor Value out of Range
12:27:15;4;Elevator Sensor Value out of Range
12:25:51;4;Aileron Sensor Value out of Range
12:25:51;4;Aileron Sensor Value out of Range
12:25:51;3;The Cyclic Ring is active
12:25:52;4;Aileron Sensor Value out of Range
12:25:55;4;Extreme Vibration Level
12:27:06;2;Raised Vibration Level
12:27:07;4;Elevator Sensor Value out of Range
12:27:07;4;Elevator Sensor Value out of Range
12:27:14;4;Aileron Sensor Value out of Range
12:27:14;4;Elevator Sensor Value out of Range
12:27:14;4;Aileron Sensor Value out of Range
12:27:15;4;Elevator Sensor Value out of Range