← VBar NEO for external transmitters

Neo on express translated

VBar › VBar NEO for external transmitters · Started by brookie280 on 17 August 2016 15:0517.08.2016 15:05
brookie280 17 August 2016 15:0517.08.2016 15:05
Hi newby here, is there anybody on here can help me to set up my Neo on a DX9.
I have Trex500 pro
Align esc Neo on express and spektrum sats.
I do not want to use the Neo Governor and I have been told you can use aux3 for the throttle in the transmitter and pluging it into aux3 on the Neo
But when i do the esc just's keeps peeping.
Any assistance would be appreciated.

Mike
RV 17 August 2016 18:3817.08.2016 18:38
Quote:I do not want to use the Neo Governor and I have been told you can use aux3 for the throttle in the transmitter and pluging it into aux3 on the Neo
But when i do the esc just's keeps peeping.

Well - if it beeps - the signal from the TX won't be as expected from the ESC.

For a test ... plug in a servo and see if it works in general. If yes - it maybe a question of endpoints and direction setting in your TX. We just pass this signal to AUX3 - so we're out here.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
brookie280 18 August 2016 09:2018.08.2016 09:20
Many thanks for your reply
VStabi VStabi Pioneer of Flybarless