← VBar NEO for external transmitters

Safety Switch - Futaba 8FG translated

VBar › VBar NEO for external transmitters · Started by rmarlan on 21 August 2016 06:4421.08.2016 06:44
rmarlan 21 August 2016 06:4421.08.2016 06:44
Setup my goblin with Vbar govenor - all works great. Can not get standard futaba throttle hold (switch SH) to work as safety switch. I have used switch SG as motor switch. Please provide specific instructions on how to get this to work. Thank you!
RV 21 August 2016 23:1721.08.2016 23:17
I made a example according to VBC functionality here:

http://vstabi.info/en/node/1946

If you want to have others - it must be done within the TX manual using the flight conditions and their dependencies in TX etc. I never tried - i like the clean style w/o unneeded things - just like a VBar Control ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless