← VBar NEO for external transmitters

spektrum - extra channel with rescue translated

VBar › VBar NEO for external transmitters · Started by ragge1 on 19 November 2016 21:1619.11.2016 21:16
ragge1 19 November 2016 21:1619.11.2016 21:16
I'm thinking of my next project and I'm using DX9 with DSMX sats , this is for the upcomming SAB heli
using the NEO with rescue so my question is , is it possible to have an extra channel that will control an extra servo thus landing gear and at the same time can still have rescue channel available
don't have an extra NEO yet to test myself
thanks
RV 19 November 2016 21:5419.11.2016 21:54
Yes - the AUX2 and AUX3 can be assigned to a channel in RX setup Tab.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ragge1 20 November 2016 23:0520.11.2016 23:05
very nice Thanks ;-)
VStabi VStabi Pioneer of Flybarless