← VBar NEO for external transmitters

Hi translated

VBar › VBar NEO for external transmitters · Started by ronaldwilliams on 6 December 2016 14:0306.12.2016 14:03
ronaldwilliams 6 December 2016 14:0306.12.2016 14:03
I have a vbar neo I am trying to set up vbar governor , I have read on the internet that I need to set up throttle curves in the tx , can anybody tell me why I need to set up throttle curves when I am using the governor cheers Ron
RV 6 December 2016 17:2706.12.2016 17:27
Hello Ron,

you have to give the right signals only for:

- our Motor channel (-100 - 0 - +100 / Off - Auto - Run)
- our Bank channel (-100 - 0 - 100 / Bank1 - 2 - 3)

How this must be done with your TX - can be sometimes in "abuse" with the throttlecurves to give us the right signals. In this case it is just a signal for the NEO - nothing to do with the Gov in flight.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless