← VBar NEO for external transmitters

Vbar Neo and Hobbywing platinum setup translated

VBar › VBar NEO for external transmitters · Started by David Heath on 2 April 2017 17:1002.04.2017 17:10
David Heath 2 April 2017 17:1002.04.2017 17:10
Hi,

Help needed, I have just put together a Trex470 and fitted a Hobbywing platinum 60 Esc, I am using my Vbar Neo with futaba S bus 14sg.
I can't get it to work and I can't work out what I am doing wrong, I don't even understand how to do the calibration using the Vbar neo.

Can someone give me step by step setup help please?
Eddi E. aus G. 3 April 2017 09:4503.04.2017 09:45
Hi David,

here's a how-to.

If you intend to use the HW's internal governor, you would set the VBar to external governor and enter throttle percentages per Bank.
ESC must be set to Heli Governor Mode.

If you intend to use the VBar Governor, you would set the VBar to VBar Electric Governor and set the requested head speeds per Bank.
ESC must be set to external governor mode (see manual, I'm not familiar with HW I'm afraid).

If you want to bypass the VBar logic, take the alternative route through AUX3.

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless