aaroz
12 April 2017 09:4712.04.2017 09:47
I have a vbar neo with pro-rescue.
Understanding that the rescue is only useful if hit in good time, very often I will practice using the feature without actually needing it.
A few times, in practice, initializing rescue during inverted flight will result in significant, unnecessary loss of altitude and has almost resulted in a crash twice now (the heli luckily had very good altitude before activation of rescue)
Rescue has caused heli to dive towards the ground, WAY to much before leveling and 'rescuing' itself.
Are there any settings i should modify (running the default settings at the moment)?
Are there any neo rescue updates planned that will remedy this if it is a known issue?
Goblin 700, hV bec, Cyclone 700's, Rail 115's, 12s good specification setup, solid bird, no other issues.
Eddi E. aus G.
12 April 2017 10:0412.04.2017 10:04
Hi,
sorry to hear. No, it's not a known issue, so I would be curious.
Can you please save and attach the setup file, and give some info about head speed (if not in the setup or if only in a specific flight condition/bank), collective angles, anything.
With dive towards the ground you mean like in a tail slide but with the nose down, vertical dive?
With caused to dive, you mean the Rescue _increased_ the speed or momentum towards the ground before rescuing?
Any chance to take a video without risking the model?
Kind regards
Eddi
Born to fly ...
forced to work.
Fingolf
12 April 2017 10:2912.04.2017 10:29
Hi,
when you hit rescue, you release completely the sticks? or hold them?
Stephan
aaroz
12 April 2017 20:0412.04.2017 20:04
Hi Fellas, appreciate the replys. Attached is bank1 bank 2 on another post (just delete the .png)
Yes i'm letting rescue do its thing without touching the sticks.
It's happened flying bank1 governed to around HS 1850 and Bank2 HS 2000 (22T 12S QUANTUM 4530-500 CASTLE ICE2 160 battery showing lowest voltage around 40V during flights)
What it feels like is the Neo is either selecting the least efficient aileron direction or not applying enough negative in combination with the aileron / elevator before flipping resulting in some downward U patterns that have had me needing a change of underwear after the flight :-) TAil looks solid the model has good authority with the 115rails.
If i were pushing hard especially the lower HS i could understand, but both incidences happened a during relatively tame inverted figure 8s at the transitions.
A decent camera is on the list sorry no video footage as of yet.
Best regards
Medyan
aaroz
12 April 2017 20:0712.04.2017 20:07
aaroz
12 April 2017 20:0812.04.2017 20:08
Bank 2
Dateianhänge:
öffnen |
Download -
20170412 GOBLIN 700 Aaroz bnk2.vbr
(2.3 KB)
aaroz
12 April 2017 20:1112.04.2017 20:11
had to add .vbr to the files to allow for uploading
Dateianhänge:
öffnen |
Download -
20170412 GOBLIN 700 Aaroz bnk1.vbr
(2.3 KB)
Eddi E. aus G.
13 April 2017 08:5213.04.2017 08:52
Hi,
I have checked the setup and find nothing in particular _but_ the fact that the collective balance value is set to 10 for all banks, which would only be required on speed helicopters with excessively high collective angles.
On a regular setup (12-14° of collective), it should be around 35, which is also default (or if you updated from an earlier version, it would be -1 (parameter was not yet used/set) which will also automatically fall back to 35, internally).
I can not really imagine if or how this could affect the behavior of Rescue, but since it changes the point where the anti-ballooning feature kicks in, in relation to the overall collective, it _could_ at least do something if both collective and cyclic are operated, when you actuate Rescue.
I would set it to 35 for all three banks if your collective angles are within a reasonable range (speed pilots might set up for 18° and more where it helps adjusting the collective balance parameter to shift the point where anti-ballooning kicks in).
Kind regards
Eddi
Born to fly ...
forced to work.
aaroz
13 April 2017 11:4313.04.2017 11:43
Hi Eddie,
Sounds like a good place to start, im running about 12-13.5° depending on bank/HS i'll make that balance adjustment and try to force another incident when the weather is being nice again.
Heli is remarkably stable even when topping 200km/h, on a 'speed' (like) run will be interesting to see if i start to get any ballooning after making the change.
Appreciate the tip
Regards
Medyan