← VBar NEO for external transmitters

Slow tail kit to the left when coming off positive pitch translated

VBar › VBar NEO for external transmitters · Started by joecass on 27 June 2017 02:4727.06.2017 02:47
joecass 27 June 2017 02:4727.06.2017 02:47
I get a slow tail kick when returning pitch back down when doing a clime out. The tail also kicks when doing tic toc ail. or ele. tic toc slow small kicks. I got -1 when setting zero collective. tail is smooth and fee.

I tried lowering gov. gain but not much improvement.

This is a whiplash gasser.
joecass 27 June 2017 02:5127.06.2017 02:51
Her is the set up file Dateianhänge:
öffnen | Download - neo set up.zip (491 bytes)
Eddi E. aus G. 27 June 2017 09:5927.06.2017 09:59
Hi,

two things I would change, which could improve the overall situation: dial down the limits (Setup/Tail) and connect the tail pushrod farther out on the tail servo arm to compensate, the servo will work better if it's not driven that much to it's physical limits (like 140 % of the travel it's designed for).

Then check that the center position is still OK, 90° angles to/fro the pushrod and approx. 2-3° of pitch on the tail at center (you may use the tail auto trim value box to dial it in).

After that, do the trim flight, this will check and optimize center positions in a hover so we have the system balanced without much need of the gyros, in a hover, at the least amount of torque (like with zero collective).

If you find the trim flight has to dial in high offsets (like more than 60 % of the gauges), you could think about changing the mechanics slightly and re-do it. But if the heli flies well then, no need to change anything, it would just be cosmetics.

Cheers

Eddi

Born to fly ...
forced to work.
joecass 27 June 2017 12:2127.06.2017 12:21
I will give that a try thanks.
joecass 27 June 2017 14:2527.06.2017 14:25
Can you tell me or post a screenshot of the tail auto trim box? Is it number 4 servo in the swash trim page?
Eddi E. aus G. 27 June 2017 15:0527.06.2017 15:05
Hi,

here you go:

Kind regards

Eddi

Born to fly ...
forced to work.

joecass 28 June 2017 17:2828.06.2017 17:28
So I have 110 on both sides for tail travel. Performed trim flight and I have -24 trim. It got better but I still have a little bounce when doing aileron tic toc.
RV 28 June 2017 21:0328.06.2017 21:03
OK - in case of TicTocs - please ceck Zero Collecitve point:

- setup collective panel
- fold blades
- move stick unless tips are on equal height
- fold back
- flight tail panel
- click "set"

The value displayed now is your calibration for the zero point. How much is it?


As next - lower tail gain (20 or 30 less), do climbs, add Torque precomp unless tail kick gets in other direction. Dial in old gain.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 29 June 2017 04:1729.06.2017 04:17
it's negative 1. I got to fly today before you posted above message and I noticed that the gov. makes the engine rev. 2 to 3 times at the top of climb out when bringing the pitch back down or when doing rainbows. I tried a gov gain setting of 50 and seem to help the tic toc a lot still getting the rev. on climb out so I tried it at 20 and for 2 climb outs it was good but then started revving again and started to get that tail bonus again when doing tic toc.

Next time out do you still want me to set the percomp?
VStabi VStabi Pioneer of Flybarless