ironman49
29 August 2017 10:0629.08.2017 10:06
My neo using v controller via a satellite receiver has a blue v light when switched on but after connection and initialisation this turns red and flashes. The swash plate jumps up and down.
The heli has flown successfully prior to this with no problems.
Eric Corker
Eddi E. aus G.
29 August 2017 10:2029.08.2017 10:20
Hi Eric,
please check out the event log, there we should see the cause of the issue.
I would guess it's just a temporary issue (IMU = Rescue Sensor, temporarily sticking because of excess adverse vibration during the previous flight).
This you can circumvent by de-selecting Precision Initialization in the Rescue Setup, then the VBar will initialize properly any time and the use of Rescue will of course still be safe.
But please check the log anyway, there are also different issues which could raise the 30+ pitch-twitch error message.
By the way, this topic belongs into one of the NEO boards, not in 5.3 ... maybe my colleague will move it soon.
Kind regards
Eddi
Born to fly ...
forced to work.