Has anyone got any info on how to set up dx7 with a neo, the problem I have is that I cannot control the head speed via the esc in my trex 450 pro, I dont know if I need some mixing for the idle up switch to get the differant head speeds or what channel numbers I need in the set up menu for the motor and bank switches ?
← VBar NEO for external transmitters
dx7 setup with neo translated
VBar › VBar NEO for external transmitters ·
Started by mikespink on 19 August 2017 22:4819.08.2017 22:48
mikespink
19 August 2017 22:4819.08.2017 22:48
mikespink
23 August 2017 15:5023.08.2017 15:50
Hi can anyone help with the setting for external govenor using a DX7 with neo as the people at Vstabi have not tried to help and I am unable to set it up on my own ?
RV
24 August 2017 00:2224.08.2017 00:22
Let us know more - are you running ESC Gov or VBar Gov?
How is it conencted?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
How is it conencted?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mikespink
24 August 2017 09:3424.08.2017 09:34
HI I am using the standard esc that comes with the Trex 450 pro and trying to use the gov from that, it is plugged in to the esc slot in the neo.
If I can use the vbar gov with the DX7 I am happy to do that as long as it will work properly and give me two head speeds.
I am not sure what set up I need in the transmitter.
If I can use the vbar gov with the DX7 I am happy to do that as long as it will work properly and give me two head speeds.
I am not sure what set up I need in the transmitter.
OliverK
24 August 2017 10:2224.08.2017 10:22
Hi, there is an example for DX8 on the Mikado-Site...Try to use that....
Greetz Oli
1 mal bearbeitet. Zuletzt am 24.08.2017 10:22 von OliverK.
Greetz Oli
1 mal bearbeitet. Zuletzt am 24.08.2017 10:22 von OliverK.
RV
24 August 2017 18:3124.08.2017 18:31
The link is here:
http://vstabi.info/en/node/1990
Try to implement that - we need for fully function:
- 4 gimbal channels
- 1 motor channel which gives us -100 and 100 - if you want to train AR's - it must give center too.
- 1 bank channel which gives -100 / 0 / 100 for 3 banks (if only -100 / 100 it has 2 Banks ...) - each bank has a fixed HS determined eithe by VGov in the bank settings (RPM sensor needed) or by the ESC % values in the Bank settings for ESC gov.
For Rescue - we need a additional channel
If you want to change HS from TX through AUX3 - one Channel more ....
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
http://vstabi.info/en/node/1990
Try to implement that - we need for fully function:
- 4 gimbal channels
- 1 motor channel which gives us -100 and 100 - if you want to train AR's - it must give center too.
- 1 bank channel which gives -100 / 0 / 100 for 3 banks (if only -100 / 100 it has 2 Banks ...) - each bank has a fixed HS determined eithe by VGov in the bank settings (RPM sensor needed) or by the ESC % values in the Bank settings for ESC gov.
For Rescue - we need a additional channel
If you want to change HS from TX through AUX3 - one Channel more ....
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mikespink
24 August 2017 19:1724.08.2017 19:17
Its very different to my transmitter but I will try to copy some of the settings and let you know how I get on.
mikespink
11 October 2017 09:2711.10.2017 09:27
Sorry but I could not get it to work properly so I have done away with it :-(