I just bought a new Vbar-neo and power on it first time. (by use a 6.6V LIFE battery)
I feel the power link is unstable , the LED has no response ,so I try to re-connect battery until it work.
After I finished register and update firmware pro+ and re-connect power , Vbar has no response anymore...
the following is the video I took .
Now , the LED will Blink in a very strange status... It seems the vbar is reboot repeatedly.
https://youtu.be/VIpi3D7XrtA
Is there any solution ?
Thanks .
1 mal bearbeitet. Zuletzt am 17.10.2017 13:30 von alanni66.
I feel the power link is unstable , the LED has no response ,so I try to re-connect battery until it work.
After I finished register and update firmware pro+ and re-connect power , Vbar has no response anymore...
the following is the video I took .
Now , the LED will Blink in a very strange status... It seems the vbar is reboot repeatedly.
https://youtu.be/VIpi3D7XrtA
Is there any solution ?
Thanks .
1 mal bearbeitet. Zuletzt am 17.10.2017 13:30 von alanni66.