← VBar NEO for external transmitters

vbar neon express help translated

VBar › VBar NEO for external transmitters · Started by RDouro on 29 October 2017 11:3829.10.2017 11:38
RDouro 29 October 2017 11:3829.10.2017 11:38
Hello all

i buy a vbar neon express .

First i make registration my bar neon than.i´m using windows 10 I make download virtual box i install win xp i run win xp and i install software vbar manager last version ok i using futaba 14sg i connect my receiver 70008SB bus port in aux1 in neon and than i connect usb port in computer and the other side i plug in vbar i connect power in vbar start with blue than pass to red and green blink all time never stop what i need to do to solved these problem .



2 mal bearbeitet. Zuletzt am 29.10.2017 12:25 von RDouro.
RV 29 October 2017 13:1729.10.2017 13:17
Hello,

having the latest W10 - VB isn't necessary (see main page article here) anymore because MS solved their driver issue ;-)

Blinking - did you do a full setup and assign/calibrate the TX channels?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
RDouro 29 October 2017 15:2729.10.2017 15:27
hello

iI only try connect radio receiver , vbar neon and software but not connect .
The vbar neon never stop bliking.
I only calibrate servos in my receiver but when i connect servos in neon doesn´t work :-(
can you help ?

Regards,
Paulo
RV 29 October 2017 18:0629.10.2017 18:06
Did you start with the "new setup" button? - If servos are not working on a brand new NEO - i think you did not ;-(

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
RDouro 29 October 2017 20:5529.10.2017 20:55
hello

my neon no initializing .Not connect in left conner always appears red
I try setup .

My be make error because i only connect receiver (sbus) with vbar neon my esc hobbywing was disconnect . this is correct ?
I need connect esc to vbar without connections motor ?


Regardds,
Paulo
RDouro 29 October 2017 23:5129.10.2017 23:51
hello

ok i see the problem in usb but now i aready fixed i send to you a photo for you see what happen


Regards,
Paulo

RV 30 October 2017 18:1030.10.2017 18:10
Did you request, download and copy the devioces keyfile as per manual?

http://www.vstabi.info/en/node/2087

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
RDouro 1 November 2017 13:4401.11.2017 13:44
Hello

Tank you for your attention !
Now it is registered and I can start to configure it :-)

Regards,

Paulo
RV 2 November 2017 19:5402.11.2017 19:54
:-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless