Vinger
24 February 2018 04:3324.02.2018 04:33
I am helping a fellow pilot to do his set up on a Spektrum DX 18 and a Neo non VLink with Spektrum satellites.
The transmitter section on vstabi only describes the older models and not the later radios. Can this be updated and if not can you please give us a step by step guide on how to do the TX settings in the DX18 for the Neo.
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV
25 February 2018 07:2725.02.2018 07:27
I am afraid we don't have other TX here ;-(
But - it is just as simple:
Program the TX in a way which uses one single "channel" for each function. So it emulates the handling of a VBC.
- Stick controls (as usual)
- Motor Switch (3-way best)
- Bank Switch (3-way best)
- Rescue (if used bot modes, 3-way, if rescue only start from center, use spring loaded)
- Nitro kill (if nitro)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.